Controls And Indicators; Controls; Indicators - BD Alaris Directions For Use Manual

Controls and Indicators

Controls

Symbol Description
ON/OFF Button – Press once to switch the Workstation on . Press and hold for two seconds to switch
a
the Workstation off . In the event that the system needs to be reset, press and hold for at least four
seconds, then press again to switch the Workstation on .
Note: Logs are maintained for power down events including when the Workstation is powered
a

Indicators

Symbol Description
j
Battery Indicator – When illuminated the Workstation is operating from internal battery; when
flashing the battery power is low and auto power down is imminent .
j
k
AC Power Indicator – When illuminated the Workstation is connected to the AC power supply and
the battery is being charged .
k
A Status Indicator – Provides a visual indication of the internal software activity .
B Status Indicator – Provides a visual indication of communication activity of the network within
the Workstation .
d
ON Status Indicator – When illuminated the Workstation is powered on .
w
System Fault Indicator – The Workstation illuminates this indicator when an internal fault is present
and detected or when the Workstation is operating from internal battery .
down or unexpected power loss .
BDDF00794 Issue 4
Alaris™ Gateway Workstation v1.3.x
Controls and Indicators
13/46