Table of Contents
Advertisement
Barcode Reader (optional)
Overview
The barcode reader (where fitted) allows the scanning and recognition of barcodes .
The Workstation must be powered down before attaching or disconnecting the barcode reader.
Visual Indicators
The barcode reader has two LED indicators (green and red) located on the top of the reader . When the reader is on, the
LEDs indicate the current status of the reader .
All LEDs off - The barcode reader is not receiving power or the barcode reader is in standby mode .
Steady Green - The laser is active .
Steady Green, Single Red Flash - The barcode has been read successfully .
Scanning a Barcode
1 . Make sure that the barcode is in the barcode reader scan field (within approx . 10cm of the laser aperture) . The barcode
reader is automatically activated and the green LED is illuminated .
2 . Align the barcode with the visible laser line .
3 . The barcode reader automatically scans the barcode .
4 . When the barcode reader successfully reads the barcode, the red LED flashes and the barcode reader beeps once . The
barcode data is transmitted to the Workstation .
Cable Connection
Laser Aperture
BDDF00794 Issue 4
Alaris™ Gateway Workstation v1.3.x
Barcode Reader (optional)
Green LED
Red LED
33/46
Advertisement
Table of Contents
