BD Alaris Directions For Use Manual page 29

Workstation Mounting Precautions
When mounting the Workstation to a mounting option other than pole or equipment rail, the
following warnings must be observed:
Ensure the mounting option is capable of supporting a fully laden Workstation (see 'Product
Specifications') prior to mounting.
The Workstation should not be fitted to any other mobile mounting option unless the stability
and strength of the whole assembly has been evaluated to EN/IEC 60601-1.
Do not overload the mounting option. To ensure stability follow the guidelines given in the
'Product Specifications' section.
Do not orientate the Workstation with the AC inlet or outlets exposed in the event of a fluid
spill.
Pole Mounting
Ensure the pole is capable of supporting a fully laden Workstation (see 'Product
Specifications') prior to mounting.
Check that the pole clamp handle is in full working order before use.
The pole clamp should be used to mount the Workstation on fixed poles / overhead swing arm
poles only.
People of a weak disposition should not attempt to use / tighten the pole clamp system.
Equipment Rail/Mobile Trolley Mounting
Do not overload the Trolley. To ensure stability follow the guidelines given in the 'Product
Specifications' section.
The Workstation should not be fitted to any other mobile pole or drip stand unless the
stability and strength of the whole assembly has been evaluated to EN/IEC 60601-1.
A mobile Trolley mounted Workstation is recommended to be transported by two persons
when moving over an uneven surface or when the Workstation is fully loaded.
Any rail system for supporting medical devices must comply with BSEN 12218:1999. Ensure
the rail is capable of supporting a fully laden Workstation (see 'Product Specifications') prior to
mounting.
Do not orientate the Workstation with the AC inlet or outlets exposed in the event of a spill.
When mounted to the Alaris™ Gateway Workstation Trolley and not in transport the Trolley
brakes should be engaged.
BDDF00794 Issue 4
Alaris™ Gateway Workstation v1.3.x
Operating Precautions
28/46