Table of Contents
Advertisement
Owners of Magnetrol products may request the return of a control; or, any part of a control for complete rebuilding or
replacement. They will be rebuilt or replaced promptly. Magnetrol International will repair or replace the control, at no cost to
the purchaser, (or owner) other than transportation cost if:
a. Returned within the warranty period; and,
b. The factory inspection finds the cause of the malfunction to be defective material or workmanship.
If the trouble is the result of conditions beyond our control; or, is nOT covered by the warranty, there will be charges for labour
and the parts required to rebuild or replace the equipment.
In some cases, it may be expedient to ship replacement parts; or, in extreme cases a complete new control, to replace the orig-
inal equipment before it is returned. If this is desired, notify the factory of both the model and serial numbers of the
control to be replaced. In such cases, credit for the materials returned, will be determined on the basis of the applicability of our
warranty.
No claims for misapplication, labour, direct or consequential damage will be allowed.
So that we may efficiently process any materials that are returned, it is essential that a "Return Material Authorisation" (RMA)
form will be obtained from the factory. It is mandatory that this form will be attached to each material returned. This form is avail-
able through Magnetrol's local representative or by contacting the factory. Please supply the following information:
1. Purchaser Name
2. Description of Material
3. Serial Number
4. Desired Action
5. Reason for Return
6. Process details
All shipments returned to the factory must be by prepaid transportation. Magnetrol will not accept collect shipments.
All replacements will be shipped FOB factory.
UNDER RESERVE OF MODIFICATIONS
European Headquarters & Manufacturing Facility
Heikensstraat 6
9240 Zele, Belgium
Tel: +32-(0)52-45.11.11
e-mail: info.magnetrolbe@ametek.com
www.magnetrol.com
iMpORTanT
SERVicE pOLicY
RETURnED MaTERiaL pROcEDURE
BULLETIN N°:
BE 46-602.7
EFFECTIVE:
JANUARY 2005
SUPERSEDES:
March 1997
Advertisement
Table of Contents
