Graco ProMix PD2K Operation page 17

Table 3 3 3 : : : Soft Soft Key Key Functions Functions (Applicator)
Table Table Soft Key Functions
Key Key Key Function Function Function
* * * These These icons icons appear appear only only if if if manual
These icons appear only
Press to put gun into Idle mode.
Idle*
Press to put gun into Spray mode.
Spray*
Press to put gun into Purge mode.
Purge*
Press to activate/deactivate gun trigger solenoid.
Applicator Trigger*
Press to activate/deactivate atomizing air solenoid when the applicator is in Idle, Spray,
or Purge mode.
Atomizing Air*
Press to activate/deactivate the inner shaping air solenoid when the applicator is in Idle
or Spray mode.
Inner Shaping Air*
Press to activate/deactivate fan air solenoid when the applicator is in Idle, Spray, or Purge
mode.
Fan Air*
Press to activate/deactivate the outer shaping air solenoid when the applicator is in Idle
or Spray mode.
Outer Shaping Air*
Press to activate/deactivate electrostatics when the applicator is in Spray mode and PD2K
is in Mix mode.
Electrostatic
Enable*
Press to calibrate the atomizing air feedback voltage from the pressure transducer when
the applicator is in Gun Off mode.
Calibrate
Atomizing Air
3A4128D
(Applicator)
(Applicator)
manual override override is is is enabled enabled on
manual override enabled
Advanced Display Module (ADM)
on System Screen Screen 5 5 5 , , , page page 102
on System System Screen page
102
102
17