Multi Function Key Detail - Yaesu FT-857D Operating Manual

F P
RONT
The [ A ] , [ B ] , and [ C ] keys select many of the most
important operating features of the transceiver. When
you press the [ FUNC ] key, then rotate the SELECT
knob, the current function of that key will appear
above each of the [ A ] , [ B ] , and [ C ] keys (along the
bottom of the LCD). You may scroll the display
through 17 rows of functions available for use via the
[ A ] , [ B ] , and [ C ] keys.
Multi Function Row "a" ( MFa ) [ A/B, A=B, SPL ]
Ó Ó
[ A ] [ B ]
Multi Function Row "b" ( MFb ) [ MW, SKIP, TAG ]
Ó Ó
[ A ] [ B ]
24
C
ANEL ONTROL
M F
ULTI UNCTION
[ A ] Key: A/B
Press the [ A ]( A/B ) key to switch between VFO-A and VFO-B on the
display.
[ B ] Key: A=B
Ó
Press the [ B ]( A=B ) key to copy the contents of Main VFO to be cop-
[ C ]
ied into the Sub VFO, so that the two VFOs' contents will be identi-
cal.
[ C ] Key: SPL
Press the [ C ]( SPL ) key to activate Split frequency operation between
VFO-A and VFO-B.
[ A ] Key: MW
Press this key momentarily to enable the "Memory Check" mode, to
allow selection of an empty memory channel prior to frequency stor-
age. Press and hold in the [ A ]( MW ) key for one second to transfer the
contents of the VFO into the selected Memory register.
Ó
[ B ] Key: SKIP
[ C ]
Press the [ B ]( SKIP ) key to designate the current Memory channel to
be "skipped" during scanning.
[ C ] Key: TAG
Press the [ C ]( TAG ) key to select the display type (Frequency or Al-
pha-numeric Tag) during Memory operation. Press and hold in this
key for one second, while on a recalled channel, to open Menu No.-
056, for quick programming of an Alphanumeric Tag.
& S
K D
EY ETAIL
SELECT
[ FUNC
ô
ô
FT-857 Operating Manual
WITCHES
[ ] A ] [ B ] [ C ] DIAL