Cat - Yaesu FT-857D Operating Manual

M O
ENU PERATION
MENU MODE No•012 [ BEACON TIME ]
Function: Selects the interval time (between message and message).
Available Values: OFF/1 sec ~ 255 sec
Default: OFF
MENU MODE No•013 [ BEEP TONE ]
Function: Selects the beep frequency.
Available Values: 440/880/1760 Hz
Default: 880 Hz
MENU MODE No-014 [ BEEP VOL ]
Function: Selects the beep volume level.
Available Values: 0 ~ 100
Default: 50
Press the [ B ] key to monitor the level during adjustment.
MENU MODE No•015 [ CAR LSB R ]
Function: Sets the Rx Carrier Point for LSB.
Available Values: –300 ~ +300 Hz
Default: 0 Hz
MENU MODE No•016 [ CAR LSB T ]
Function: Sets the Tx Carrier Point for LSB
Available Values: –300 ~ +300 Hz
Default: 0 Hz
MENU MODE No•017 [ CAR USB R ]
Function: Sets the Rx Carrier Point for USB
Available Values: –300 ~ +300 Hz
Default: 0 Hz
MENU MODE No•018 [ CAR USB T ]
Function: Sets the Tx Carrier Point for USB
Available Values: –300 ~ +300 Hz
Default: 0 Hz
MENU MODE No•019 [ CAT RATE ]
Function: Sets the transceiver's circuitry for the CAT baud rate to be used.
Available Values: 4800bps/9600bps/38400bps
Default: 4800bps
MENU MODE No•020 [ CAT/LIN/TUN ]

CAT

/LINEAR jack on the rear panel.
Function: Selects the device which is connected to the
Available Values: CAT/LINEAR/TUNER
Default: CAT
FT-857 Operating Manual 99