Cw Identifier Setup - Yaesu FT-857D Operating Manual

T
RANSMITTER

CW Identifier Setup

The ARTS™ feature includes a CW identifier, as discussed previously. Every ten minutes
™
operation, the radio can be instructed to send "DE (your callsign) K" if this
during ARTS
feature is enabled. The callsign field may contain up to 10 characters.
Here's how to program the CW Identifier:
1. Press and hold the [ FUNC ] key for one second to enter the Menu mode.
2. Rotate the SELECT knob to recall Menu Mode No-001 [ EXT MENU ] , then rotate the
DIAL to change the setting to "ON" to enable the extended Menu Mode.
3. Rotate the SELECT knob to select the Menu Mode No-010 [ ARTS IDW ] .
4. Press the SELECT knob momentarily to initiate callsign storage (the first character
location of the callsign field will be underlined.).
5. Rotate the DIAL knob to select the first letter/number of your callsign, then rotate the
SELECT knob one click clockwise to save the first letter/number and move to the next
entry position.
6. Repeat the previous step as many times as necessary to complete your callsign.
7. Press the SELECT knob momentarily to save your completed callsign and exit.
8. Rotate the SELECT knob one click counter-clockwise to select the Menu Mode No-
009 [ ARTS ID ] .
9. Rotate the DIAL to set the CW ID function to "ON."
10. Press and hold in the [ FUNC ] key for one second to save the new setting and exit to
normal operation.
62
O
PERATION
FM T
RANSMISSION
FT-857 Operating Manual