Yaesu FT-857D Operating Manual page 29

F P
RONT
Multi Function Row "h" ( MFh ) [ SCOP, WID, STEP ]
Ó Ó
[ A ] [ B ]
Multi Function Row "i" ( MFi ) [ MTR, – – –, DISP ]
Ó Ó
[ A ] [ B ]
FT-857 Operating Manual
C
ANEL ONTROL
M F
ULTI UNCTION
[ A ] Key: SCOP
Press the [ A ]( SCOP ) key to activate the Spectrum Scope Monitor fea-
ture.
Press and hold in the [ A ]( SCOP ) key for one second to initiate the
Ó Spectrum Scope.
[ B ] Key: WID
[ C ]
Press the [ B ]( WID ) key to select the visible bandwidth for the Spec-
trum Scope Monitor.
Press and hold in the [ B ]( WID ) key for one second to select the oper-
ating mode for the Spectrum Scope Monitor.
[ C ] Key: STEP
Press the [ C ]( STEP ) key to select the channel steps for Spectrum Scope
Monitor.
Press and hold in the [ C ]( STEP ) key for one second to activate the
MAX HOLD feature, which will display and hold the peak signal
strength level for each channel.
[ A ] Key: MTR
Pressing the [ A ]( MTR ) key repeatedly allows selection of the display
function of the meter in the transmit mode.
PWR à ALC à SWR à MOD à PWR ......
Ó
The selected function will appear above the [ B ] key.
Press and hold in the [ A ]( MTR ) key for one second to recall Menu
[ C ]
Mode No-062 [ MTR PEAK HOLD ] (for setting the "peak-Hold" func-
tion of the meter).
[ B ] Key
Pressing the [ B ] key repeatedly allows selection of the display func-
tion of the meter in the transmit mode.
PWR à MOD à SWR à ALC à PWR ......
[ C ] Key: DISP
Press the [ C ]( DISP ) key to switch the display between the Large Char-
acter and Small Character modes. In the "Large Character" mode, the
VFO/Memory label and the Mode indication will disappear, as the
frequency display field is doubled in size.
Press and hold in the [ C ]( DISP ) key for one second to recall Menu
Mode No-043 [ DISP INTENSITY ] (for setting of the display bright-
ness level).
& S
K D
EY ETAIL
ô
ô
WITCHES
27