Yaesu FT-857D Operating Manual page 104

M O
ENU
MENU MODE No•032 [ CW WEIGHT ]
Function: Sets the Dot:Dash ratio for the built-in electronic keyer.
Available Values: 1:2.5 ~ 1:4.5
Default: 1:3.0
MENU MODE No-033 [ DCS CODE ]
Function: Setting of the DCS code.
Available Values: 104 Standard DCS codes
Default: 023
You can set the DSC codes for Encode and De-
code separately.
To switch between "ENCODE (T)" and "DE-
CODE (D)," press the SELECT knob, then ro-
tate the DIAL konb.
MENU MODE No•034 [ DCS INV ]
Function: Selects "Normal" or "Inverted" DCS
coding.
Available Values: Tn-Rn/Tn-Riv/Tiv-Rn/Tiv-Riv ("n" = "normal, " "iv" = "inverted")
Default: Tn-Rn
MENU MODE No-035 [ DIAL STEP ]
Function: Setting of the DIAL knob's tuning speed.
Available Values: FINE/COARSE
Default: FINE
You may choose between two speeds for the DIAL knob. Selecting "COARSE" doubles the
tuning rate compared to the default value.
FINE: 10 Hz/step @SSB/CW mode, 100 Hz/step @AM/FM
COARSE: 20 Hz/step @SSB/CW mode, 200 Hz/step @AM/FM
MENU MODE No•036 [ DIG DISP ]
Function: Defines the displayed frequency offset during DIG (USER-L or USER-U) mode
operation.
Available Values: –3000 ~ +3000 Hz
Default: 0 Hz
MENU MODE No•037 [ DIG GAIN ]
Function: Adjusts the audio input level from terminal equipment (such as a TNC or PSK-31
sound card) during DIG (Digital) mode operation.
Available Values: 0 ~ 100
Default: 50
102
PERATION
DCS CODE
023 025 026 031 032 036 043 047 051 053
054 065 071 072 073 074 114 115 116 122
125 131 132 134 143 145 152 155 156 162
165 172 174 205 212 223 225 226 243 244
245 246 251 252 255 261 263 265 266 271
274 306 311 315 325 331 332 343 346 351
356 364 365 371 411 412 413 423 431 432
445 446 452 454 455 462 464 465 466 503
506 516 523 526 532 546 565 606 612 624
627 631 632 654 662 664 703 712 723 731
732 734 743 754 –
FT-857 Operating Manual
– – – – –