Cat System Programming - Yaesu FT-818ND Operating Manual

CAT System Programming

The FT-818's CAT System allows the transceiver to be controlled by a personal computer.
This allows multiple control operations to be fully automated as a single mouse click, or it
allows a third-party software package (such as contest logging software) to communicate
with the FT-818 without (redundant) operator intervention.
The Optional USB Interface Unit SCU-17 may be used for CAT control of the transceiver
with a computer via a USB connection.
The Optional CAT Interface Cable CT-62 is a connection cable for the FT-818 and your
computer. The CT-62 has a built-in level converter, allowing direct connection from the rear
panel ACC jack to the serial port of your computer, without the need for an external RS-
232C level converter box.
Yaesu Musen does not produce CAT System operating software, due to the wide variety of
personal computers, operating systems, and applications in use today. However, the FT-
818 (and other Yaesu products) are widely supported by third-party software packages,
and we recommend that you contact your dealer for advice, or check advertisements in
amateur radio journals. Most software vendors also have Home Pages on the World Wide
Web which contain a wealth of information on the features and radio support for their soft-
ware packages.
SCU-17
ACC
CT-62 (Option)
USB Cable
ANT
KEY DATA ACC
:
INPUT 13.8V
GND
ACC
RS-232C
CT-62 (Option)
64