3
2
1
1 Trigger
2 CSYNC
3 Video
Caution
To protect both yourself and the computer from electrical hazards, the computer
should remain off and unplugged until you finish installing the 1407 device.
© National Instruments Corporation
Depopulate the W1 jumper to set the 1407 to high impedance. Figure 2-2
shows the location of the W1 jumper and other 1407 parts.
4
4 W1 Jumper
5 Product Name
♦
PCI-1407
You can install the PCI-1407 in any available PCI expansion slot in your
computer. However, to achieve the best noise performance, leave as much
room as possible between the PCI-1407 and other boards and hardware.
The following are general instructions, but consult your computer user
manual or technical reference manual for specific instructions and
warnings.
1.
Turn off and unplug your computer.
2.
Follow the electrostatic discharge guidelines in the
section of this chapter.
3.
Remove the cover of your computer.
5
Figure 2-2. PCI-1407 Parts Locator Diagram
2-7
Chapter 2
6
6 Assembly Number
7 Serial Number
Safety Information
IMAQ PCI/PXI-1407 User Manual
Installation
7