disconnect the appliance from power supply. In either
case contact the Authorised Service Centre.
After use, switch off the hob element by its control and
•
do not rely on the pan detector.
WARNING: The appliance and its accessible parts
•
become hot during use. Care should be taken to avoid
touching heating elements.
Always use oven gloves to remove or insert
•
accessories or ovenware.
Before pyrolytic cleaning, remove all accessories and
•
excessive deposits/spills from the appliance cavity.
Before maintenance, cut the power supply.
•
WARNING: Ensure that the appliance is switched off
•
before replacing the lamp to avoid the possibility of
electric shock.
If the mains power supply cable is damaged, it must
•
be replaced by the manufacturer, its Authorised
Service Centre or similarly qualified persons to avoid
an electrical hazard.
Use only the food sensor (core temperature sensor)
•
recommended for this appliance.
Be careful when you touch the storage drawer. It can
•
get hot.
To remove the shelf supports first pull the front of the
•
shelf support and then the rear end away from the
side walls. Install the shelf supports in the opposite
sequence.
WARNING: Use only hob guards designed by the
•
manufacturer of the cooking appliance or indicated by
the manufacturer of the appliance in the instructions
for use as suitable or hob guards incorporated in the
appliance. The use of inappropriate guards can cause
accidents.
ENGLISH
5