Xerox DocuMate 765 User Manual page 41

Scanning from One Touch
34
The Device Settings Tab
A Device Settings tab appears on the Scan Configurations dialog box
when your selected Destination Application sends the scanned image to a
printer, fax application, or other device. You use the options on the Device
Settings tab to select settings for the device.
1. Click on the Device Settings tab.
Fit to page, reduce image if necessary—If the scanned image is
too big to be printed or faxed on a single page, the image will
automatically be reduced to fit the page.
Actual size, crop image if necessary—If the scanned image is too
big to be printed or faxed on a single page, the image will
automatically be cropped around its edges to fit on the page.
Center image on page—The image will be printed in the center of
the page instead of at the top right corner.
Maintain aspect ratio—The aspect ratio is the length-to-width
relationship of the image's dimensions. Select this option so the
image's relative proportions remain constant.
AutoRotate image for best fit—If the image is a Landscape format
and the device is printing in the Portrait mode, or vice versa, rotate
the image to fit on the page.
Collate copies—If you are printing more than one page, collate the
copies. Enter the number of copies in the Copies box.
Advanced—Click to see additional settings for the device. The dialog
that opens is specific to the device. For example, if the device is your
printer, the dialog box is your printer's setup settings.
2. Click OK or Apply.
DocuMate 765 Scanner User's Guide