Xerox DocuMate 262 User Manual page 109

Maintenance
104
Problem: The installation will not complete successfully.
If installation finishes, the scanner's One Touch 4.0
options do not seem to work properly. What do I do?
A likely cause is that some driver programs are already installed on
your computer for another scanner. They are interfering with the
installation and One Touch options, and you need to remove those
other drivers and re-install your Xerox DocuMate 262 scanner.
Please see the documentation that you received with the other
scanner for the steps to remove its driver programs. You can also
use the basic steps in the section "Uninstalling Your Scanner" on
page 107, but in Step 3, instead of uninstalling One Touch 4.0,
uninstall the other scanner's driver programs. After uninstalling the
other scanner's driver programs, uninstall One Touch 4.0 using the
steps on page 107, then reinstall it using the steps on page 7.
Problem: I got the error message: PaperPort cannot
allocate enough memory to perform internal critical
operations. What do I do?
Close any other active applications so that additional memory is
available. If you click Continue, PaperPort moves the file to the
PaperPort data directory and renames the file with the prefix "bad".
This allows you to recover the file later.
To recover the file, you can import it into PaperPort by using the
Import command in the File menu.
Problem: How do I uninstall PaperPort?
See the section "Uninstalling Your Scanner" on page 107.
Uninstalling does not delete your scanned items, and they remain
in the PaperPort Data folder.
DocuMate 262 Scanner User's Guide