Configure Before Scan - Xerox DocuMate 152 User Manual

Configure Before Scan

DocuMate 152 Scanner User's Guide
Choosing Configure Before Scan simply opens a scanning
interface when you click a button. You can then use the interface to
change the Resolution, Scan Mode, and other settings. When you
scan, the scanned image will still be sent as the file type and to the
same Destination Application already selected in the One Touch
Properties window for that button.
To Set Configure Before Scan:
1. Open the One Touch Properties window.
2. Using the arrows, choose the button that you want to set to
configure before scanning.
3. Select the scan configuration Configure Before Scan.
Click the arrows to
select the button.
Select Configure
Before Scan.
Right-click on
Configure Before
Scan to get the menu,
and choose the
interface to use for
scanning.
4. Right-click on Configure Before Scan and choose an interface
to use for configuring before scanning.
TWAIN—The TWAIN Interface opens for you to make changes
prior to scanning.See "Accessing the TWAIN Interface from
PaperPort" on page 84.
WIA—The Windows Image Acquisition Interface (WIA) opens
for you to make changes prior to scanning (available on
Windows XP or Windows Vista only). See "Scanning with the
WIA Interface" on page 97.
5. Click OK or Apply on the One Touch Properties window.
Scanning
61