Xerox DocuMate 152 User Manual page 110

DocuMate 152 Scanner User's Guide
3. When the roller is unlocked, it can be removed from its
mounting sockets. Gently press the roller to the right to free its
left side. Then angle the roller to the front of the scanner until it
is clear of the housing, and bring it out and away from the
scanner body.
4. Discard the worn roller. It cannot be repaired.
5. Before installing the new roller, clean any dust that may have
gotten on it during shipping.
6. To install the new roller, insert the right end of the roller into its
housing socket. Make sure the lock tab is facing up and the
lock flange is not obstructed. If the gears on the end of the
roller do not engage easily, slightly rotate the roller while gently
pressing it into the housing until you feel them engage. Do not
force the gears to engage.
Maintenance
105