Motorola solutions PELCO Sarix Professional 4 Operation Manual
  1. Manuals
  2. Brands
  3. Motorola solutions Manuals
  4. Security Camera
  5. PELCO Sarix Professional 4
  6. Operation manual

Motorola solutions PELCO Sarix Professional 4 Operation Manual

Hide thumbs Also See for PELCO Sarix Professional 4:
Table of Contents

Advertisement

Quick Links

Download this manual
Sarix® Professional 4
Operations Manual
Document number: C6724M
Publication date: 03/24

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PELCO Sarix Professional 4 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Motorola solutions PELCO Sarix Professional 4

Summary of Contents for Motorola solutions PELCO Sarix Professional 4

  • Page 1 Sarix® Professional 4 Operations Manual Document number: C6724M Publication date: 03/24...

  • Page 2: Table Of Contents

    Sarix® Professional 4 Operations Manual Table of Contents Introduction System Requirements Accessing Camera Settings Accessing the Camera Web Interface Creating the Initial User Logging In Logging Out Using the Live View Saving a Still Image Configuring the System Settings Configuring General Settings Managing the Camera Firmware Configuring Storage Management Enabling Onboard Storage...
  • Page 3 Sarix® Professional 4 Operations Manual Uploading Certificates Uploading CA Certificates Creating Certificates Configuring Imaging Configuring General Imaging Settings Understanding Backlight Compensation (BLC) and Wide Dynamic Range (WDR) Adjusting White Balance Settings Using Window Blanking Setting a Window Blank Deleting a Window Blank Configuring A/V Streams Compression and Image Rate Configuring Smart Compression...

  • Page 4: Introduction

    Sarix® Professional 4 Operations Manual Introduction Before you access the web interface, make sure all the procedures described in the camera installation guide have been completed. Note: Features and options are disabled if they are not supported by the camera. System Requirements The web interface can be accessed from any Windows, Mac, or mobile device using one of the following browsers:...

  • Page 5: Accessing Camera Settings

    Sarix® Professional 4 Operations Manual Accessing Camera Settings Use the Motorola Camera Configuration Tool (CCT) https://www.pelco.com/camera-configuration-tool/ or the camera web user interface to access camera settings. Note: Smart Analytics configuration requires the CCT. Accessing the Camera Web Interface After the camera has been installed, use the camera's IP address to access the web interface. The IP address can be found in the Motorola Camera Configuration Tool (CCT) —...

  • Page 6: Logging Out

    Sarix® Professional 4 Operations Manual Logging Out To log out of the camera, at the upper right corner of the window, click Logout. Note: After 15 minutes of inactivity, the Web UI will automatically log the user out. C6724M | 03/24...

  • Page 7: Using The Live View

    Sarix® Professional 4 Operations Manual Using the Live View After you log in, the first page you see is the Live View. The Live View contains an image panel that displays the live video stream. Use the tabs at the top of the window to navigate through the web interface. Click the Live View tab at any time to return to this page.

  • Page 8: Configuring The System Settings

    Sarix® Professional 4 Operations Manual Configuring the System Settings Use the System tab to configuring General Settings, Firmware, Storage Management, and Diagnostics. Configuring General Settings The General Settings page allows you to set the camera's identity. 1. Click the System tab, and then click the General Settings button. 2.

  • Page 9: Configuring Storage Management

    Sarix® Professional 4 Operations Manual To download a bug report, in the Download Bug Report area, click Download. To reboot the camera, in the Reboot Device area, click Reboot. To restore the camera to factory defaults, but preserve Network settings, in the Restore to Factory Defaults area, select the Soft Reset checkbox.

  • Page 10: Downloading Recorded Video From The Web Interface

    Sarix® Professional 4 Operations Manual Downloading Recorded Video from the Web Interface Listed in the Export Recordings section are all the videos that have been recorded to the SD card. If you are using a CryptR micro card in the camera SD slot for FIPS level 3 encryption, you will not be able to use onboard storage in the SD card slot.

  • Page 11: Extended Settings

    Sarix® Professional 4 Operations Manual 1. Click the System tab, and then click the Storage Management button. 2. Delete video by one of the following methods: To delete individual video files, in the Recordings section, select all of the files you want to delete from the Recordings list, click Delete, and then click OK in the confirmation dialog box.
  • Page 12 Sarix® Professional 4 Operations Manual and password. Info — Status information sent by the camera. These are the lowest level log messages. 4. In the Maximum Number of Logs drop-down menu, select the number of log messages you want displayed. 5.

  • Page 13: Configuring The Network And Security Settings

    Sarix® Professional 4 Operations Manual Configuring the Network and Security Settings Use the Network and Security tab to configure the Network, Security, Users, 802.1X, SNMP, DSCP, and IP Filter settings. Configuring the Network Settings On the Network page, you can change how the camera connects to the server network and choose how the camera keeps time.
  • Page 14 Sarix® Professional 4 Operations Manual To change the prefix length, enter the preferred IPv6 address using Classless Inter-Domain Routing (CIDR) notation. For example, 2001:db8::1/32 would indicate the address prefix is 32-bits long. By default, the prefix length is set to /64. Note : The configured prefix length might not display correctly in the web interface, but the prefix used by the camera will be the configured length.

  • Page 15: Enabling Srtp Streaming

    Sarix® Professional 4 Operations Manual 11. In the Security area, click to select from the drop-down menu the Minimum TLS version that the camera should to encrypt the communication between camera and server, and to block older TLS versions that should not be used. TLS 1.2 is recommended for increased security.

  • Page 16: Adding A User

    Sarix® Professional 4 Operations Manual Adding a User 1. Click the Network and Security tab, and then click the Users button. 2. Click Add..3. On the Add User page, enter a User Name and Password for the new user. 4.

  • Page 17: Configuring 802.1X Port-Based Authentication

    Sarix® Professional 4 Operations Manual Caution : Forgetting your own username or password after enabling this setting voids your warranty. The primary method of restoring the factory default username and password will be disabled. 1. Click the Network and Security tab, and then click the Users button. 2.

  • Page 18: Switching 802.1X Authentication Profiles

    Sarix® Professional 4 Operations Manual Switching 802.1X Authentication Profiles To use a different authentication profile, select the saved configuration then click Enable. Removing an 802.1X Authentication Profile To delete one of the authentication profiles, select the saved configuration, and then click Remove. Returning to the Network Page To return to the Network and Security tab, Network page, click the Back To Network Setup button at the lower left of the page.

  • Page 19: Configuring Dscp

    Sarix® Professional 4 Operations Manual a. Username: enter the username that the management station must use when sending the SNMP Get request to the camera. b. Password: enter the password the management station must use with the chosen username. 6. Click Apply to save the settings. Configuring DSCP Differentiated services or DiffServ is a computer networking architecture that specifies a simple and scalable mechanism for classifying and managing network traffic and providing quality of service (QoS)

  • Page 20: Configuring The Ip Filter

    Sarix® Professional 4 Operations Manual 8. In the Tertiary Stream drop-down menu, click to select one of the options: CS3(24) (This is the default option.) AF33(30) 9. In the Replay Stream drop-down menu, click to select one of the options: CS3(24) (This is the default option.) AF33(30) CS4(32)

  • Page 21: Managing Certificates

    Sarix® Professional 4 Operations Manual Managing Certificates On the Certificates page, administrators can manage certificates. Certificates are used to authenticate devices and encrypt communication over the network. In the Certificates area, you can view the following information: Cert ID: Used to uniquely identify the certificate. Subject: The entity a certificate belongs to: a machine, an individual, or an organization.

  • Page 22: Uploading Certificates

    Sarix® Professional 4 Operations Manual Uploading Certificates 1. To upload a certificate, click Upload Cert. a. Certificate: click Choose File to upload a certificate. b. Private key: click Choose File to upload a private key. c. Private key password: enter the private key password. 2.

  • Page 23: Configuring Imaging

    Sarix® Professional 4 Operations Manual Configuring Imaging On the Imaging and Display page, you can control the camera’s day/night and exposure settings and view the camera’s live video stream. Configuring General Imaging Settings You can set the camera’s zoom and focus through this page. 1.
  • Page 24 Sarix® Professional 4 Operations Manual None 90 degrees 180 degrees 270 degree Note : Image rotation should not be combined between the camera and VMS image rotation settings. Perform the image rotation either in the camera or in the VMS, but not both. 7.
  • Page 25 Sarix® Professional 4 Operations Manual 9. To adjust the exposure of the image, adjust the Exposure Settings: Flicker Control: If your video image flickers because of fluorescent lights around the camera, you can reduce the effects of the light by setting the Flicker Control to the same frequency as your lights.

  • Page 26: Understanding Backlight Compensation (Blc) And Wide Dynamic Range (Wdr)

    Sarix® Professional 4 Operations Manual Understanding Backlight Compensation (BLC) and Wide Dynamic Range (WDR) BLC is a feature that optimizes exposure in the foreground and background of security video. BLC uses a single exposure time for the whole image, and uses auto exposure to ignore very bright regions (or very dark, if set negative).
  • Page 27 Sarix® Professional 4 Operations Manual 5. Adjust the video image as required. You can either use a preset configuration, or you can create your own custom configuration. Use the Preset drop-down menu to select the preferred configuration: a. Pelco: This preset provides the recommended balance of brightness and color for video surveillance.

  • Page 28: Using Window Blanking

    Sarix® Professional 4 Operations Manual Using Window Blanking On the Window Blanking page, you can set window blanks (privacy zones) in the camera’s field of view to block out areas that you do not want to see or record. The camera supports up to 64 window blanks. Setting a Window Blank 1.

  • Page 29: Configuring A/V Streams

    Sarix® Professional 4 Operations Manual Configuring A/V Streams Use the A/V Streams tab to configure Video Configurations,Audio Configurations, Streaming Settings and Smart Compression. Compression and Image Rate On the Compression and Image Rate , you can change the camera’s compression and image quality settings for sending video over the network.

  • Page 30: Viewing The Rtsp Stream Uri

    Sarix® Professional 4 Operations Manual When Smart Compression is enabled, the camera will automatically switch to idle scene mode settings when there are no motion events detected. For more information, see the section titled Configuring Motion Detection. The camera uses pixel change motion to detect foreground objects and therefore uses the standard Motion Detection sensitivity settings of the camera.

  • Page 31: Saving Or Restoring Video Configurations

    Sarix® Professional 4 Operations Manual 1. Click the A/V Streams tab, and then click the Video Configurations button. 2. In the Still Image URI area, click the link. The last recorded frame of video from the camera’s tertiary stream is displayed if the encoding type is set to H.264 or H.265.

  • Page 32: Configuring Events

    Sarix® Professional 4 Operations Manual 1. Click the A/V Streams tab, and then click the Smart Compression button. 2. In the On Motion section, Background Quality field, enter the compression quality for the background (between the default of 6 and the lowest setting of 20). 3.

  • Page 33: Configuring Tamper Detection

    Sarix® Professional 4 Operations Manual The higher the sensitivity, the smaller the amount of pixel change is required before motion is detected. 4. In the Threshold field, enter a percentage number to define how many pixels must change before the image is considered to have motion. The higher the threshold, the higher the number of pixels must change before the image is considered to have motion.

  • Page 34: Suspending Self Learning

    Sarix® Professional 4 Operations Manual Suspending Self Learning You can now stop the self-learning video analytics from continuing to learn the scene so that the camera continues to recognize objects correctly based on previous learnings and does not degrade its detection of objects when left to operate in sparse scenes.
  • Page 35 Sarix® Professional 4 Operations Manual e. Click Trigger to manually trigger the digital output from the web interface. f. Click Apply to save the settings. C6724M | 03/24...

  • Page 36: Configuring Elevate

    Sarix® Professional 4 Operations Manual Configuring Elevate Use the Elevate tab to connect a camera to Elevate and view Image Health settings. Note: To connect a camera to Elevate, you must have an Elevate account. To create an account, visit elevate.pelco.com/register. Connecting a Camera to Elevate On the Camera Connection page, users can connect an Elevate-enabled camera to Elevate.
  • Page 37 Sarix® Professional 4 Operations Manual Manufacturer: Videotec s.r.l. Address: Via Friuli, 6-I-36015 Schio (VI) - Italy (+39) 0445 697411 Tel Pelco, Inc. 625 W. Alluvial Ave., Fresno, California 93711 United States (800) 289-9100 Tel (800) 289-9150 Fax +1 (559) 292-1981 International Tel +1 (559) 348-1120 International Fax www.pelco.com Pelco, the Pelco logo, and other trademarks associated with Pelco products referred to in this publication are trademarks of Pelco,...

Table of Contents