Displaying And Deleting Measured Values; Cleaning And Maintenance; Accessories And/Or Replacement Parts; Troubleshooting - Beurer BM 28 Instructions For Use Manual

circulatory system is sufficiently at rest represent particularly re-
liable results.

6.5 Displaying and deleting measured values

The results of every successful measurement are stored together
with the date and time. If there are more than 30 measurements,
the oldest measurements are lost.
• Press the memory button M. Select the desired user memory (
... ) by pressing the memory button M again.
• If you press the function button +, the average value
the stored measured values in the user memory will be dis-
played. If you press the function button + again, the average
value of the morning measurements for the last 7 days will
be displayed (morning: 5 am – 9 am, display
the function button + again, the average value of the evening
measurements for the last 7 days will be displayed (evening: 6
pm – 8 pm, display ). If you continue to press the function
button +, the most recent individual measured values are dis-
played in turn with the date and time.
• To switch off, press the START/STOP button
• If you forget to switch off the device, it will switch itself off
automatically after 30 seconds.
• If you want to delete the whole memory for a specific user,
press the memory button M. Press and hold the memory but-
ton M and the SET button simultaneously for 5 seconds.

7. CLEANING AND MAINTENANCE

• Clean the device and cuff carefully using only a slightly damp
cloth.
• Do not use any cleaning solutions or solvents.
• Under no circumstances hold the device or cuff under water,
as this can cause liquid to enter and damage the device and
cuff.
• If you store the device and cuff, do not place heavy objects on
the device and cuff. The cuff line should not be bent sharply.
• Remove the batteries if the device is not going to be used for
a long period of time.
8. ACCESSORIES AND/OR REPLACE-
of all MENT PARTS
Accessories and/or replacement parts are available at
www.beurer.de, under "Service". Please state the corresponding
order number.
). If you press
Designation
Universal cuff (22-42 cm) 110.031
Mains part (EU)
Mains part (UK)
.

9. TROUBLESHOOTING

Error
message
29
Item number and/or order number
071.95
072.05
Possible cause Solution
Unable to record Please wait one minute and
a pulse. repeat the measurement.
Ensure that you do not speak or
The measured
move during the measurement.
blood pressure
is outside the
measurement
range.