Maxxus Multipress 8.1 Installation & Operating Manual page 5

Assembly - Multipress
Carefully unpack all delivered parts. Have someone there to help you as some of the training device parts are bulky and
as any damages or defects occurring due to mistakes made at the time of assembly are not covered by the warranty or
guarantee. Therefore, read through the assembly instructions carefully before you start assembling, follow each assembly
step exactly as described and keep to the correct sequence of assembly as instructed. Assembly of the training device
must be carried out thoroughly by an adult person only. Assemble the training device in a location which is level, clean and
of assembly and at each time of using this device exists. For this reason, always be careful and thorough in your actions
when assembling this device. Make sure that the parts necessary for each stage of assembly are only hand tightened
the training device has been fully assembled.
CAUTION: all necessary screws, nuts and washers required to assemble this training device are delivered pre-assem-
5