Adjusting Margins For A Duplex Print - Tektronix Phaser 750 User Manual

Advanced Printing Features for Phaser 750 Printers
4.
Adjust the left margin:
a.
In the Calibrate Margins menu, scroll to Adjust Left Margin. Press Menu.
b.
Enter the amount of adjustment from Step
decrease the amount); press OK.
5.
Adjust the top margin:
a.
Scroll to Adjust Top Margin. Press Menu.
b.
Enter the amount of adjustment from Step
decrease the amount); press OK.
6. Reprint the Calibration Page to confirm the adjustment.

Adjusting margins for a duplex print

You might want to adjust the margins on a two-sided page if the image area of the front
side (shown in blue dashed line) is not aligned with the image area of the second side
(shown in red).
1.
Adjust the margins for a single-sided print (refer to page 103).
2.
In the front panel's Printer Settings menu, enable the Duplex mode: select Long-Edge
or Short-Edge.
3.
Print the Margin Adjust page from the front panel.
a.
Press Help.
b.
Scroll to Print Quality; and press Menu.
c.
Scroll to Calibrate Margins, and press Menu; the display reads:
d.
Press Print.
104
Adjust Left Margin:+0
<--- ---> OK
3
(press <--- or ---> to increase or
Adjust Top Margin:+0
<--- ---> OK
3
(press <--- or ---> to increase or
0236-62
Calibration Page
<--- ---> Print
Phaser 750 Color Printer