Separation Pages - Tektronix Phaser 750 User Manual

Separation Pages

You can have the printer insert a separation page, or divider page, to separate print jobs,
multiple copies of a single print job, or individual pages of a print job.
There are two selections to make in your printer driver.
1.
In a supported driver, locate the Separation Page options:
LaserWriter 8.3.4 driver:
I
In the Print dialog box, click Options.
LaserWriter 8.6 driver:
I
In the Print dialog box, from the pull-down menu (General) select Printer
Specific Options.
Windows 95 / Windows 98 PostScript driver:
I
Start/Settings/Printers, then select Properties for your printer. In the Setup tab,
select Advanced Paper Options.
Windows 2000 driver:
I
From the Layout tab or Paper/Quality tab, click Advanced.
Windows NT driver:
I
From the Properties tab, select the Advanced tab. From the Document Options
tab, select Printer Features.
Adobe PS3 driver for Windows 3.1:
I
Select the Features tab options.
2.
Select one of the following for Separation Page:
Off: Turns off the Separation Page feature.
I
End of Job: Inserts a separation page between individual print jobs.
I
End of Set: Inserts a separation page between copies, or sets, of a multi-copy
I
print job.
End of Page: Inserts a separation page between every page of a print job.
I
3.
Select one of the following for Separation Page Source:
Upper Tray: Takes paper for the separation page from the upper media tray.
I
Middle Tray: Takes paper for the separation page from the middle media tray, if
I
you have optional paper trays installed.
Lower Tray: Takes paper for the separation page from the lower media tray, if
I
you have optional paper trays installed.
Advanced Features and Troubleshooting Manual
Separation Pages
77