Advanced Printing Features for Phaser 750 Printers
Advanced Printing Features for
Phaser 750 Printers
Previewing with 1st Page Preview
When printing multiple pages through the driver (either multiple copies of a single page or
a multiple-page file), select 1st Page Preview to preview the first page of the job before
proceeding with the remainder of the job; this feature is useful when printing a large job.
You can set the timeout in the printer's front panel (timeout is the amount of time the
printer waits after sending the first page of a file before it continues with the remainder of
the job). The default timeout is 5 minutes.
Requirements
I
P, DP or DX Feature Set
I
Turn on the feature in the printer driver
Use 1st Page Preview
1.
In a supported driver, select 1st Page Preview:
LaserWriter 8.3.4 driver:
I
In the Print dialog box, click Options.
LaserWriter 8.6 driver:
I
In the Print dialog box, from the pull-down menu (General) select Printer
Specific Options.
Windows 95 / Windows 98 PostScript driver:
I
Start/Settings/Printers, then select Properties for your printer. In the Setup tab,
select Expert Options.
Windows 2000 driver:
I
From the Layout tab or Paper/Quality tab, click Advanced.
Windows NT driver:
I
Under the Properties tab, select the Advanced tab. In the Document Options tab,
select Printer features.
Adobe PS3 driver for Windows 3.1:
I
Select the Features tab options.
2.
Check your first print. At the printer's front panel 1st Page Preview message, choose
one of these options:
Reprint: Reprints the first page, pauses for the duration of timeout or until you
I
press a button.
Cancel: Cancels the print job.
I
Continue: Prints the rest of the print job.
I
3.
Press Select.
100
Phaser 750 Color Printer