User Safety; Electrical Safety - Xerox Phaser 6280 User Manual
Color printer
Hide thumbs
Also See for Phaser 6280:
- Service manual (672 pages) ,
- User manual (158 pages) ,
- Quick use manual (6 pages)
Table of Contents
Advertisement
User Safety
Your printer and the recommended supplies have been designed and tested to meet strict
safety requirements. Attention to the following information ensures the continued safe
operation of your printer.
Electrical Safety
•
Use the power cord supplied with your printer.
•
Plug the power cord directly into a properly grounded electrical outlet. Make sure each
end of the cord is securely connected. If you do not know if an outlet is grounded, ask
an electrician to check the outlet.
•
Do not use a ground adapter plug to connect the printer to an electrical outlet that
does not have a ground connection terminal.
•
Do not use an extension cord or power strip.
•
Verify that the printer is plugged into an outlet that is capable of providing the correct
voltage and power. Review the printer's electrical specification with an electrician if
necessary.
Warning:
Avoid the potential of electrical shock by ensuring that the printer is properly
grounded. Electrical products may be hazardous if misused.
•
Do not place the printer in an area where people might step on the power cord.
•
Do not place objects on the power cord.
•
Do not block the ventilation openings. These openings are provided to prevent
overheating of the printer.
•
Do not drop paper clips or staples into the printer.
Warning:
Do not push objects into slots or openings on the printer. Making contact with a
voltage point or shorting out a part could result in fire or electrical shock.
If you notice unusual noises or odors:
1. Turn off the printer immediately.
2. Disconnect the power cord from the electrical outlet.
3. Call an authorized service representative to correct the problem.
The power cord is attached to the printer as a plug-in device at the back of the printer. If it
is necessary to disconnect all electrical power from the printer, disconnect the power cord
from the electrical outlet.
Warning:
Do not remove the covers or guards that are fastened with screws unless you are
installing optional equipment and are specifically instructed to do so. Power should be OFF
when performing these installations. Except for user-installable options, there are no parts
that you can maintain or service behind these covers.
Phaser® 6280 Printer
8
User Safety
Hide quick links:
Advertisement
Table of Contents
