Moving The Printer - Xerox Phaser 6280 User Manual

Moving the Printer

Moving the Printer

Carry out the following procedure when moving the printer.
To view precautions and guidelines for safely moving your printer, see User Safety on
page 8.
The printer, configured with the optional accessories, paper trays, and consumables,
weighs 24.5 kg (54 lb.).
When moving the equipment, make sure that there are two or more persons carrying it.
When lifting the printer, be sure to observe the following points. Failure to do so may cause
the printer to fall and result in injuries.
Two persons, one facing the front of the printer (control panel) and the other facing the
back, should firmly grip the recessed areas on the bottom part of both sides of the printer.
Never try to lift the printer by gripping any other areas.
24.5 kg
54 lb.
6280-040
Warning: If the 550-Sheet Feeder (optional) has been installed, uninstall it before moving
the printer. If these are not fixed securely to the printer, they may fall to the ground and
cause injuries. For details on how to uninstall the options, refer to the instructions sheet
that is bundled with each option.
Note: The front side of this printer is heavier than the rear. Take note of this difference in
weight when moving the printer.
Phaser® 6280 Printer
150