Downloaded From Manualsprinter.com Manuals; User Safety - Xerox Phaser 4500 Reference Manual

Your printer and the recommended supplies have been designed and tested to meet strict safety
requirements. Attention to the following information will ensure the continued safe operation
of your printer.
Electrical Safety
■
■
■
■
Warning
■
■
■
■
Warning
If you notice unusual noises or odors:
1.
2.
3.

Downloaded From ManualsPrinter.com Manuals

User Safety

Use the power cord supplied with your printer.
Plug the power cord directly into a properly grounded electrical outlet. If you do not know
if an outlet is grounded, ask an electrician to check the outlet.
Do not use a ground adapter plug to connect the printer to an electrical outlet that does not
have a ground connection terminal.
Do not use an extension cord or power strip.
Avoid the potential of electrical shock by ensuring that the printer is properly grounded.
Electrical products may be hazardous if misused.
Do not place the printer in an area where people might step on the power cord.
Do not place objects on the power cord.
Do not block the ventilation openings. These openings are provided to prevent
overheating of the printer.
Do not drop paper clips or staples into the printer.
Do not push objects into slots or openings on the printer. Making contact with a voltage
point or shorting out a part could result in fire or electrical shock.
Turn off the printer immediately
Disconnect the power cord from the electrical outlet
Call an authorized service representative to correct the problem.
Copyright © 2004 Xerox Corporation. All Rights Reserved.
Phaser™ 4500 Laser Printer
A-1