Microchip Technology MPLAB ICD 5 User Manual page 91

Figure 10-8. 6-Pin Standard Pinout
Table 10-5. Electrical Logic Table
Logic Inputs
Logic Outputs
10.6.3 Modular Cable and Connector
For standard communication, a modular cable connects the debugger and the target application.
The specifications for this cable and its connectors are listed below.
10.6.3.1 Modular Connector Specification
• Manufacturer, Part Number – AMP Incorporated, 555165-1
• Distributor, Part Number – Digi-Key, A9031ND
The following table shows how the modular connector pins, for an application, correspond to the
microcontroller pins. This configuration provides full in-circuit debugger functionality.
Figure 10-9. Modular Connector Pinout of Target Board
10.6.3.2 Modular Plug Specification
• Manufacturer, Part Number – AMP Incorporated, 5-554710-3
Standard Socket
2 4 6
Bottom of
Target Board
1 3 5
V = V x 0.7V (min.)
IH DD
V = V x 0.3V (max.)
IL DD
V = 5V V
DD
V = 3.8V min. V
OH
V = 0.55V max. V
OL
Modular Microcontroller
Connector Pin Pin
6 Reserved
5 RB6
4 RB7
3 Ground
2 V Target
DD
1 V
PP
© 2023 Microchip Technology Inc. and its subsidiaries
Pin Name
1 V Power
PP
2 V _TGT Power on target
DD
3 GND Ground
4 PGD (ICSPDAT) Standard Com Data
5 PGC (ICSPCLK) Standard Com Clock
6 - Reserved
= 3V V = 2.3V
DD DD
= 2.4V min. V = 1.9V min.
OH OH
= 0.55V max. V = 0.3V max.
OL OL
Front View of Modular
Connector on Target Board
1
Bottom View of Modular Connector
Pinout on Target Board
User Guide
Hardware Specification
Function
V = 1.65V
DD
V = 1.2V min.
OH
V = 0.45V max.
OL
1 6
6
DS-50003529B - 91