Table of Contents
Advertisement
VT-UTF8 Combo Key Support
Enable VT-UTF8 Combination Key Support for ANSI/VT100 terminals.
Recorder Mode
With this mode enbaled only text will be sent. This is to capture Terminal data.
Resolution 100x31
Enables or disables extended terminal resolution
Putty KeyPad
Select FunctionKey and KeyPad on Putty.
User's Manual | RPS310-R680E/Q670E
Advanced
X
ACPI Settings
Wake system from S5 via RTC
When Enabled, the system will automatically power up at a designated time every day. Once
it's switched to [Enabled], please set up the time of day — hour, minute, and second — for the
system to wake up.
State After G3
Select between S0 State, and S5 State. This field is used to specify what state the system is
set to return to when power is re-applied after a power failure (G3 state).
• S0 State
The system automatically powers on after power failure.
• S5 State
The system enter soft-off state after power failure. Power-on signal input is
required to power up the system.
Chapter 3
BIOS SETTINGS
38
Advertisement
Table of Contents
