Configuration Page; Networking Software - Xerox Phaser 860 Networking Setup Manual

Network Printing with Xerox Color Printers

Configuration Page

The information supplied on the Configuration Page is helpful when you are installing and
configuring the printer on a network. There are two ways to print the Configuration Page:
Printing a Configuration Page From the Front Panel
Use this method if your printer is not yet configured on the network.
1. highlighted, press the OK key.
With
Menus
2.
Scroll to
Printer Setup Menu
3. Press the OK key.
4. Scroll to
Print Configuration
5. Press the OK key.
6. To exit the menu system, scroll to
Printing a Configuration Page Using CentreWare Internet Services
With a TCP/IP connection and a World Wide Web browser, you can use CentreWare
Internet Services.
1. Connect to the printer via CentreWare IS (see page 23).
2. On the main CentreWare IS page, click the Print button.
3. On the left side of the Print page, click Print Configuration Page.
4. On the Print Configuration page, click the green button.
For more information on CentreWare IS, see page 23.

Networking Software

Your printer's software CD-ROM contains software for installing your printer on a
network. The CD-ROM also contains online documentation, printer drivers, and other
printer software. A single integrated installer is used to install printer drivers and other
software. For information on running the installer, see page 5.
2
by pressing the Scroll Up or Scroll Down key.
Pages.
and press the OK key.
Exit
Phaser 860 Color Printer