Sensor Q1164; Cleaning The 4Mm Cartridge Tape Drive - Xerox DocuPrint 180 Reference Manual

Cleaning the 4mm cartridge tape drive

Guide to Performing Routine Maintenance

Sensor Q1164

Sensor Q1164 is on the last feeder/stacker module (the one
containing the purge tray), as shown below. Clean the sensor
gently, with a cleaning pad.
Clean the 4mm cartridge tape drive every 25 hours of actual tape
operation. Use only a cleaning cartridge designed for the 4mm
cartridge tape drive. No fluids or other preparations are
necessary with the use of these cartridges.
Do not use cleaning cartridges or any types of fluids designed for
use in audio devices as these can damage your tape drive.
To clean the tape drive:
1. Insert the cleaning cartridge into the tape drive as you would
a data tape cartridge.
CAUTION
Cleaning
6-9