Loading Trays 3, 4, 5, And 6 - Xerox DocuPrint 180 Reference Manual

Feeder trays

Loading trays 3, 4, 5, and 6

1-6
9. Latch the paper feeder assembly by pressing the green dot
next to the green release lever until the assembly clicks into
position.
10. Push the tray in slowly but firmly until it latches. Do not slam
the tray closed. This can cause improper latching or machine
damage.
11. If the printer stopped due to a low paper condition, press the
Continue button on the printer control console to resume
printing.
Follow these steps to load feeder trays 3,4,5, and 6:
1. Select the tray you want to load by pressing the Tray Unlock
button on the door of the paper tray or by touching the
appropriate unlock icon on the printer console.
NOTE: If the printer has stopped due to a low paper
condition, you do not need to press the Tray Unlock button.
Guide to Performing Routine Maintenance