Download
Share
Print this page
NCR 7360-K435 Kit Instructions
  1. Manuals
  2. Brands
  3. NCR Manuals
  4. Racks & Stands
  5. 7360-K435
  6. Kit instructions

NCR 7360-K435 Kit Instructions

Pin pad mount (ingenico 3000/5000/7000/8000)
Hide thumbs

Advertisement

Quick Links

Download this manual
Kit Instructions
PIN Pad Mount (Ingenico 3000/5000/7000/8000)
7360-K435
Issue A

Advertisement

loading
Need help?

Need help?

Do you have a question about the 7360-K435 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for NCR 7360-K435

Summary of Contents for NCR 7360-K435

  • Page 1 Kit Instructions PIN Pad Mount (Ingenico 3000/5000/7000/8000) 7360-K435 Issue A...
  • Page 2 NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Software screen images are representative, and in some cases, may not match a customer’s installed software exactly.

  • Page 3: Revision Record

    Revision Record Issue Date Remarks Dec 2020 First Issue...

  • Page 4: Kit Contents

    PIN Pad Mount (Ingenico Lane 3000/5000/7000/8000) This publication provides procedures for installing a PIN Pad Mount for an Ingenico Lane 3000/5000/7000/8000 device on an NCR FastLane SelfServ™ Checkout (7360) unit. Note: The Ingenico Lane 3000/5000/7000/8000 PIN Pad is supplied by the customer. Kit Contents...

  • Page 5: Installation Procedures

    Installing PIN Pad Mount on page 6. • Installing Ingenico Lane 3000/5000/7000/8000 PIN Pad on page 13. Note: The Ingenico Lane 3000/5000/7000/8000 PIN Pad is not included in the 7360- K435 PIN Pad Kit. For more information, contact an NCR Customer Service Representative.
  • Page 6 PIN Pad Mount (Ingenico Lane 3000/5000/7000/8000) Removing Existing PIN Pad Mount Depending on the SelfServ Checkout unit, refer to the following: • Full Recycling (Fixed/Convertible) Unit on the next page. • Credit/Debit Only Unit on page 5.
  • Page 7 PIN Pad Mount (Ingenico Lane 3000/5000/7000/8000) Full Recycling (Fixed/Convertible) Unit To remove the existing PIN Pad Mount, follow these steps: 1. Remove the Allen key securing the PIN Pad Mount to the PIN Pad Arm. 2. Remove the PIN Pad Mount from the PIN Pad Arm, as shown in the images below.
  • Page 8 PIN Pad Mount (Ingenico Lane 3000/5000/7000/8000) Credit/Debit Only Unit To remove the existing PIN Pad Mount, follow these steps: 1. Remove the Allen key securing the PIN Pad Mount to the PIN Pad Arm. 2. Remove the PIN Pad Mount from the PIN Pad Arm, as shown in the images below.
  • Page 9 PIN Pad Mount (Ingenico Lane 3000/5000/7000/8000) Installing PIN Pad Mount Depending on the SelfServ Checkout unit, refer to the following procedures: • Full Recycling (Fixed/Convertible) Unit on the facing page. • Credit/Debit Only Unit on page 9.
  • Page 10 PIN Pad Mount (Ingenico Lane 3000/5000/7000/8000) Full Recycling (Fixed/Convertible) Unit To install the PIN Pad Mount on a Fixed or Convertible unit, follow these steps: 1. Attach the PIN Pad Mount to the PIN Pad Arm. 2. Position the PIN Pad Mount so that its edge is approximately parallel with the Pivot Arm Surface.
  • Page 11 PIN Pad Mount (Ingenico Lane 3000/5000/7000/8000) 3. Fasten the PIN Pad Mount to the PIN Pad Arm using the Allen key.
  • Page 12 PIN Pad Mount (Ingenico Lane 3000/5000/7000/8000) Credit/Debit Only Unit To install the PIN Pad Mount on a Credit/Debit Only configuration unit, follow these steps: 1. Using an Allen key, remove two (2) Allen head screws securing the PIN Pad Plate to the Tilt Arm.
  • Page 13 PIN Pad Mount (Ingenico Lane 3000/5000/7000/8000) 3. Install the PIN Pad Plate on the Tilt Arm using two (2) Allen head screws. 4. Attach the PIN Pad Mount to the PIN Pad Arm.
  • Page 14 PIN Pad Mount (Ingenico Lane 3000/5000/7000/8000) 5. Position the PIN Pad Mount so that its edge is approximately parallel with the Pivot Arm Surface.
  • Page 15 PIN Pad Mount (Ingenico Lane 3000/5000/7000/8000) 6. Fasten the PIN Pad Mount to the PIN Pad Arm using the Allen key.
  • Page 16 Note: For the purpose of illustration only, this procedure shows images using a Full Recycling (Fixed/Convertible) unit. Note: The Ingenico Lane 3000/5000/7000/8000 PIN Pad is not included in the 7360-K435 PIN Pad Kit. For more information, contact an NCR Customer Service Representative.
  • Page 17 PIN Pad Mount (Ingenico Lane 3000/5000/7000/8000) 3. Connect the cable to the PIN Pad port. 4. Attach the PIN Pad to the PIN Pad Mount, as shown in the image below.
  • Page 18 PIN Pad Mount (Ingenico Lane 3000/5000/7000/8000) Note: The maximum vertical tilt of the PIN Pad Plate 80° and the minimum vertical tilt is 20° as shown in the image below.