Table of Contents
Advertisement
Xe88qrg.bk Page 4 Thursday, February 17, 2000 4:25 PM
Note: It is recommended that you load
and print one envelope or
transparency at a time.
2.4
U s e r G u i d e
L O A D I N G M E D I A
Move the left paper guide until it is resting
4
gently against the left edge of the paper.
The paper tray can be filled to the MAX
line with standard weight paper (16 to 24
lbs.
Gently push the paper release lever back.
The paper will be clamped by the paper
feed roller inside the printer.
If printing onto an envelope:
5
Ensure that the side to be printed on is
facing upwards (as shown by the imprint
on the paper tray) and the flap on the
reverse side is closed and at the right
when looking from the front of the
printer. Leave a gap of approximately
1/32 in. (1 mm) between the paper guide
and the left edge of the envelope.
Advertisement
Table of Contents
