Table of Contents
Advertisement
Click Advanced butto, the interface is shown as below. See Figure 5-30.
Please refer to the following sheet for detailed information.
Parameter
IPv4 address
IPv4 netmask
IPv4 gateway
Start IP/End IP
Upgrade
5.8.2.4 WIFI
Please note this function is for the device of WIFI module.
The WIFI interface is shown as in Figure 5-31.
Figure 5-30
Function
Input WIFI AP IP address.
Input WIFI AP network mask.
Input WIFI AP gateway.
Input start IP and end IP. The NVR can allocate the IP address
in the range you specified here.
Click it to upgrade WIFI AP module.
324
Advertisement
Table of Contents
