Table of Contents
Advertisement
Original scale
Auto logout
Display
intelligent
rule(s)
5.8.5.3.2 Tour
The tour interface is shown as in Figure 5-107. Here you can set tour interval, split mode, motion detect
tour and alarm tour mode.
Please refer to the following sheet for detailed information.
Parameter
Enable tour
Interval
Split
Motion
tour/Alarm
tour
5.8.5.4 Alarm Out
Click the Set button to select a channel, it can restore original scale.
Here is for you to set auto logout interval once login user remains
inactive for a specified time. Value ranges from 0 to 60 minutes. 0
means there is no standby time. After the auto logout, the user
needs to input user name and password to login again.
Check the box to enable IVS function, system can display IVS rule
on the preview interface.
Figure 5-107
Function
Check the box here to enable tour function.
Here is for you to adjust transparency. The value ranges from 5 to
120s. The default setup is 5s.
Here you can set window mode and channel group. System can
support 1/4/8/9/16/25/36-window according to device channel
amount.
Here you can set motion detect tour/alarm tour window mode.
System supports 1/8-window now.
371
Advertisement
Table of Contents
