Wifi - Dahua NVR4108-P User Manual


UDP port: Default value is 37778.

HTTP port: Default value is 80.

HTTPS port: Default value is 443.

RTSP port: Default value is 554.
Important: System needs to reboot after you changed and saved any setup of the above four ports.
Please make sure the port values here do not conflict.

4.12.1.3 WIFI

The WIFI interface is shown as below. See Figure 4-102.

Enable: Check the box here to enable WIFI function.

Refresh: You can click it to search the hotspot list again. It can automatically add the information
such as the password if you have set it before.

Disconnect: Here you can click it to turn off the connection.

Connect: Here you can click it to connect to the hotspot. System needs to turn off current connection
and then connect to a new hotspot if there is connection of you selected one.
Figure 4-101
172