Wifi Ap - Dahua 41HS-W-S2 Series User Manual


UDP port: Default value is 37778.

HTTP port: Default value is 80.

HTTPS port: Default value is 443.

RTSP port: Default value is 554.
Important: System needs to reboot after you changed and saved any setup of the above four ports.
Please make sure the port values here do not conflict.

4.14.1.3 WIFI AP

Note
This function is for some series product only.
4.14.1.3.1 WIFI AP
The WIFI AP interface is shown as below. See Figure 4-123. Here you can set WIFI hotspot, so that the
network camera can use the hotspot to connect to the network.

2.4GHz/5GHz: Please check the box to enable the function.

SSID: It is to set SSID name. You can use this name to search the device.

Password: It is to set SSID password. You can use this password to connect to the network.

Security: Select authentication mode from the dropdown list.

Channel: Please select a channel from the dropdown list. The default setup is auto.

Mode: There three options: high/middle/low. Please select from the dropdown list.
Figure 4-122
252