Scene Change （Optional - Dahua 41HS-W-S2 Series User Manual

Select SN (object1/2/3/4) and direction, and then input customized rule name.

Object1/2/3/4: System supports four zones. Each SN stands for one zone.

Direction (
one for the specified time.. For icon
the zone for the specified time.

Period: It refers to the object in/out the zone time.
Now you can draw a rule. Left click mouse to draw a line, until you draw a rectangle, you can right click
mouse.
Click Ok to complete the rule setup.
Tips
Click to delete the corresponding rule.
You can refer to the chapter 4.13.2.1 to set parameters.
4.13.2.4 Scene Change （Optional）
Please make sure you are connecting to the smart network camera, otherwise you can not use
IVS function!
When the detected scene changes, system can generate an alarm.
From main menu->Setting->Event->IVS->Scene change, the interface is shown as in Figure 4-106.
You can refer to the chapter 4.13.2.1 to set parameters.
/ ): For icon , system can generate an alarm once the object left in the
, system can generate an alarm once the object is out of
Figure 4-106
239