Table of Contents
Advertisement
USB2.0 port
IR
receive
window
Power indicator
light
HDD abnormal
indicator light
Network
abnormal
indicator light
Alarm indicator
light
2.2 Rear Panel
2.2.1 NVR100/100-P Series
The NVR100 rear panel is shown as below. See Figure 2-17.
The NVR100-P rear panel is shown as below. See Figure 2-18.
Please refer to the following sheet for detailed information.
Port Name
character (small/capitalized) and etc.
In HDD management interface, you can click it to switch
HDD record information and other information (Menu
prompt)
Realize other special functions.
To connect USB2.0 storage device, USB2.0 mouse, burner and
etc.
It is to receive the IR signal from the remote control.
Power indicator light.
HDD error occurs or HDD capacity is below specified threshold
value, the light becomes red to alert you.
Network error occurs or there is no network connection, the light
becomes red to alert you.
The light becomes on when an alarm occurred.
Figure 2-17
Figure 2-18
Connection
Function
USB2.0 port. Connect to mouse, USB storage
USB2.0 port
device, USB burner and etc.
76
Advertisement
Table of Contents
