Mounting Of Battery (Cell Battery - Cr 2032) - Only For Models With Wireless Regulation; Operating Your High Pressure Washer; Connection Of High Pressure Hose; Mounting Of Spray Lance And Click&Clean Nozzles - Nilfisk-Advance D 130.4 X-TRA Instructions For Use Manual

3.4 Mounting of Battery (Cell battery – CR 2032) – Only for models with Wireless regulation
Unscrew (1) the lid (2) to access the battery compartment in the wireless spray handle.
A7
Gently push the battery (3) into the battery holder (4), + sign facing upwards as
illustrated.
Mount the lid (1) to the battery compartment (2). Make sure that the lid gasket (3) is still
placed properly in the groove at the spray handle.
When the battery is mounted correctly, the orange LED (1) will fl ash for two minutes or
A8
until the spray handle has been paired with the machine. If pairing is not executed within
2 min., the spray handle enters into stand-by mode (battery saving) -> for pairing see
section 4.7.
• If in standby mode and no pairing is in place, then the pairing process can be revital-

When the battery runs out and you insert a new battery, the old battery must be disposed of
safely.

4 Operating your high pressure washer

B

4.1 Connection of high pressure hose

Attach the high pressure hose (4) to the spray handle (7). Detach the high pressure hose
B1
by pressing the pawl (A).
Mount the high pressure hose on the outlet (3) (models without hose reel).
B2
4.2 Mounting of spray lance and Click&Clean nozzles
Push the spray lance (6) into the spray handle (7), twist and release.
B3
The spray lance has a built-in low pressure nozzle that can be used for fl ushing away
dirt.
When attaching the nozzles (8, 9,10), press the nozzles into the spray lance.
B4

When attaching the click & Clean nozzles, the pawl on the side of the spray lance should come
out again. The nozzle should stay in position when pulling it.
Push the foam sprayer (11) into the spray lance (6).
B5
The foam sprayer features a swivel lock, which must be positioned in the hole in the Click &
Clean spray lance. Press the pawl to detach the Click & clean nozzles and the foam sprayer.

Before starting the cleaning job, check that the machine is in an upright position and placed on
an even surface. Do not place the machine in long grass!
Original Instructions
ized by pressing the up/down keys to activate the spray handle. Orange LED will then
fl ash until pairing is completed or resuming standby mode.
See the pictorial quick reference guide – operating your high pressure washer.
IMPORTANT!
NOTE!
IMPORTANT!
NOTE!
IMPORTANT!
EN
DA
NO
SV
FI
DE
FR
NL
IT
ES
PT
EL
TR
CS
HU
PL
HR
SL
SK
LV
LT
ET
RU
ZH
11