Calibrate The Touchscreen - Tektronix TLA7000 Series Installation Manual

Restoring and Reinstalling Software

Calibrate the Touchscreen

86
If you have an older version of the software on the hard disk, the installation
program will detect it and ask if you want to remove it. Follow the on-screen
instructions to remove the software, answering "Yes" to any prompts.
5. After the software has been successfully installed, restart the instrument.
6. If you have installed the TLA application software on a PC for remote
operation, start the software by double-clicking on the TLA Application icon.
The TLA Startup dialog box displays.
a. Select an instrument in the TLA Connection dialog box, and then click
the Connect button. If your instrument is connected to a network, you can
connect to any instrument on your local network that has a TLA server
running, enabled, and is not currently being used by another user.
b. Click Offline to start an offline version of the TLA application software.
The TLA Offline software allows you to run the TLA application without
connecting to a real instrument. You can analyze previously acquired data
from a logic analyzer, create or modify reference memories, or perform
system tests without being connected to a real instrument.
If you have a TLA7012 Portable Logic Analyzer, you might need to perform the
following steps to calibrate the touchscreen:
1. Go to the Windows desktop and the double-click the Touch screen cofigurator
(the pointing Device icon or small mouse graphic). The Touch Screen
Properties window appears.
2. Click Calibrate and follow the on-screen instructions to perform the alignment
routine. Use a stylus to ensure the best accuracy.
You can also customize some of the functions of your touchscreen in the Touch
Screen Properties window. Right-click on the selection text to view a description
of the function.
TLA7000 Series Logic Analyzers Installation Manual