Stryker Medical Adel 4700 Maintenance Manual
  1. Manuals
  2. Brands
  3. Stryker Medical Manuals
  4. Medical Equipment
  5. Adel 4700
  6. Maintenance manual

Stryker Medical Adel 4700 Maintenance Manual

Maternity bed
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IMPORTANT
File in your
maintenance
records
Stryker Adelt Maternity Bed
Models 4700 & 5012
MAINTENANCE MANUAL
For Parts or Technical Assistance
1-800-327-0770 (option 2)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Adel 4700 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Stryker Medical Adel 4700

Summary of Contents for Stryker Medical Adel 4700

  • Page 1 IMPORTANT File in your maintenance records Stryker Adelt Maternity Bed Models 4700 & 5012 MAINTENANCE MANUAL For Parts or Technical Assistance 1-800-327-0770 (option 2)

  • Page 2: Table Of Contents

    Table of Contents Introduction Specifications ................Warning / Caution / Note Definition .
  • Page 3 Table of Contents Assembly Drawings and Parts Lists (Continued) Fowler Motor Assembly ..............53, 54 Fowler Potentiometer Assembly .
  • Page 4 Table of Contents Assembly Drawings and Parts Lists (Continued) Air Mattress Assembly ............. . . 110, 111 Power Mattress Assembly .

  • Page 5: Introduction

    Introduction INTRODUCTION This manual is designed to assist you with the maintenance of the Stryker Adel Maternity Bed. Read it thor- oughly before beginning any maintenance on the equipment. SPECIFICATIONS Maximum Weight Capacity 500 pounds (227 kilograms) Bed Length/Width 90” x 41” (with siderails up) - 37” (with siderails down) 229 cm x 104 cm (with siderails up) - 94 cm (with siderails down) Bed Height (to top of seat) 19”...

  • Page 6: Safety Tips And Guidelines

    Introduction SAFETY TIPS AND GUIDELINES Before operating the Stryker Adel Maternity Bed, it is important to read and understand all information in this manual. Carefully read and strictly follow the safety guidelines listed on this page. It is important that all users have been trained and educated on the inherent hazards associated with the usage of electric beds.

  • Page 7: Unpacking Instructions

    Unpacking and Initial Set-Up Procedures UNPACKING INSTRUCTIONS Refer to unpacking instructions attached to the bed inside the crate. SET-UP PROCEDURES It is important that the Stryker Adel Maternity Bed is working properly before it is put into service. The following list will help ensure that each part of the bed is tested.

  • Page 8: Bed Symbols And Illustration

    Bed Symbols Warning, Refer to Service/Maintenance Manual Alternating Current Type B Equipment: equipment providing a particular degree of protection against elec- tric shock, particularly regarding allowable leakage current and reliability of the protec- tive earth connection. Class 1 Equipment: equipment in which protection against electric shock does not rely on BASIC INSULATION only, but which includes an additional safety precaution in that means are provided for the connection of the EQUIPMENT to the protective earth con- ductor in the fixed wiring of the installation in such a way that ACCESSIBLE METAL...
  • Page 9 Bed Symbols SYMBOL DESCRIPTION Warning: Potential Electrical Shock if Cover is Removed. Keep Feet Clear. Warning: Read all Instructions Before Plugging in the Bed. Warning: Unplug Bed Before Using the Hand Crank. Night Light On/Off Switch CPR Release Lift to Lower Lift to Move In or Out...
  • Page 10 Bed Symbols SYMBOL DESCRIPTION 1. Raise Fowler (back rest). 2. Raise foot section. 3. Lower Fowler. 4. Lower foot section. Activate Nurse Call 1. Turn TV or radio on or select a channel. 2. Increase volume. 3. Decrease volume. 1. Turn the room light on or off. 2.
  • Page 11 Bed Symbols SYMBOL DESCRIPTION 1. Raise Fowler (back rest). 2. Raise bed height. 3. Raise foot section. 4. Lower Fowler (back rest). 5. Lower bed height. 6. Lower foot section. 1. Lower head end of bed. 2. Toggle siderail lights to different settings. 3.
  • Page 12 Bed Symbols SYMBOL DESCRIPTION 1. Turn TV or radio on or select a channel. 2. Activate Nurse Call. 3. Increase volume. 4. Decrease volume. 5. Turn the room light on or off. 6. Turn the bed overhead light on or off. 7.
  • Page 13 Bed Illustration WARNING Potential pinch points...

  • Page 14: Cleaning

    Cleaning WARNING Hand wash all surfaces of the bed with warm water and mild detergent. Dry thoroughly. DO NOT STEAM CLEAN, PRESSURE WASH, HOSE OFF OR ULTRASONICALLY CLEAN. Using these methods of cleaning is not recommended and may void this product’s warranty. Inspect the mattress cover after each use.
  • Page 15 Cleaning Quaternary Germicidal Disinfectants, used as directed, and/or Chlorine Bleach products, typically 5.25% So- dium Hypochlorite in dilutions ranging between 1 part bleach to 100 parts water, and 2 parts bleach to 100 parts water are not considered mild detergents. These products are corrosive in nature and may cause damage to your stretcher if used improperly.

  • Page 16: Preventative Maintenance Checklist

    Preventative maintenance should be performed at a minimum of annually. A preventative maintenance pro- gram should be established for all Stryker Medical equipment. Preventative maintenance may need to be performed more frequently based on the usage level of the product.

  • Page 17: Static Discharge Precautions

    All electronic service parts will be shipped in static shielding bags. Do not open the bags until you have com- pleted steps 2 and 3 of the following procedure. All circuit boards must be returned to Stryker Medical. Return circuit boards in the static shielding bags the new boards were shipped in.

  • Page 18: Service Information

    Service Information - Base STEER WHEEL CABLE ADJUSTMENT Required Tools: (2) 10 mm Open End Wrenches Adjustment Procedure: 1. Remove the base frame cover from the (patient) right side of the bed. 2. Position the steer pedal (located at the head end of the bed) in the off position. 3.

  • Page 19: Lift Motor Removal And Replacement

    Service Information - Litter LIFT MOTOR REMOVAL AND REPLACEMENT Required Tools: 1/2” Wrench T27 Torx Wrench Hammer Punch 3/8” Socket Wrench Standard Screwdriver Snap Ring Pliers 5/16” Nut Driver 3/16” Allen Wrench 5/32” Allen Wrench 9/16” Wrench (2) 2x4’s Removal Procedure: 1.

  • Page 20: Trend Motor Removal And Replacement

    Service Information - Litter LIFT MOTOR REMOVAL AND REPLACEMENT (CONTINUED) Removal Procedure (Continued): 21. Move the lift motor assembly toward the head end of the bed. 22. Remove the motor by lowering it and moving it toward the head end of the bed. 23.

  • Page 21: Fowler In/Out Motor Removal And Replacement

    Service Information - Litter FOWLER IN-OUT MOTOR REMOVAL AND REPLACEMENT Required Tools: 3/8” Socket Wrench 5/16” Socket Wrench Removal Procedure: 1. Raise the bed and the Fowler to the full up position. 2. Run the Fowler to the full out position (toward the head end of the bed). WARNING If the Fowler slide will not run electrically, it must be manually cranked out (toward the head of the bed) to prevent personal injury when the motor is removed.

  • Page 22: Foot Motor Removal And Replacement

    Service Information - Litter FOWLER MOTOR REMOVAL AND REPLACEMENT (CONTINUED) 8. Unplug the capacitor wires. 9. Lift the electrical pan up slightly and turn it sideways on an angle. WARNING It is important to properly support the Fowler before proceeding or personal injury could result. 10.

  • Page 23: Power Supply Board Replacement

    Service Information - Litter POWER SUPPLY BOARD REPLACEMENT Required Tools: 3/8” Socket Ratchet Needle Nose Pliers Procedure: 1. Properly ground yourself (see page 16 for static discharge precautions). 2. Raise the Fowler to the full up position. 3. Unplug the bed power cord from the wall socket. 4.

  • Page 24: Lift, Foot, And Fowler Calibration Procedure

    Service Information - Litter OPTIONAL POWER BOARD REPLACEMENT Required Tools: 3/8” Socket Ratchet 5/16” Nut Driver Removal Procedure: 1. Properly ground yourself (see page 16 for static discharge precautions). 2. Raise the Fowler to the full up position. 3. Unplug the bed power cord from the wall socket. 4.
  • Page 25 Service Information - Litter LIFT, FOOT, AND FOWLER CALIBRATION PROCEDURE (CONTINUED) Lift Calibration Procedure (Continued): 4. Press the “bed up” button and raise the bed until the seat section skin is 37 1/2” above the floor (±1/8”). 5. To set the lift limit: press first the “head down” (Trendelenburg) button, then the “bed up” button. Note: It is important to press the “head down”...

  • Page 26: Smart Tv Interface Burn-In Procedure

    Service Information - Litter SMART TV INTERFACE BURN-IN PROCEDURE This procedure is used for selecting the style of TV interface desired for your bed. If traditional TV is desired, no calibration is required. If optional Smart TV is available on the bed, select one of the TV manufacturers listed in the table below.

  • Page 27: Troubleshooting Guide

    Electrical Troubleshooting TROUBLESHOOTING GUIDE DEFINITIONS: DMM = Digital Multi-Meter PCB = Printed Circuit Board CPU = Central Processing Unit NOTE See pages 29-33 for an outline of bed PCB’s and voltage test points. See pages 23 & 24 for potentiometer calibration.
  • Page 28 Electrical Troubleshooting TROUBLESHOOTING GUIDE (CONTINUED) PROBLEM/FAILURE RECOMMENDED ACTION No Fowler down motion. A. Enter diagnostics, (see page 23) and check for Fowler down mo- tion. If motion is present, re-burn all limits. B. If no Fowler down motion is present, check the Fowler Slide Out switch for proper connection.
  • Page 29 Electrical Troubleshooting TROUBLESHOOTING GUIDE (CONTINUED) PROBLEM/FAILURE RECOMMENDED ACTION No Lumbar Firm. A. Check for 5VDC on HDR2 pin 1 white and pin 2 black of the option power board. B. Check for 12 VDC on HDR2 pin 1 red and pin 3 black of the option power board.

  • Page 30: Bed Circuit Boards

    Bed Circuit Boards CPU BOARD KIT WITH HEAD WALL INTERFACE - P/N 5010-500-2 CPU BOARD KIT WITHOUT HEAD WALL INTERFACE - P/N 5010-500-3 59-137 Shunt for No Nurse Call...
  • Page 31 Bed Circuit Boards CPU BOARD KIT WITH HEAD WALL INTERFACE - P/N 5010-500-2 CPU BOARD KIT WITHOUT HEAD WALL INTERFACE - P/N 5010-500-3 CONNECTOR CABLE VOLTAGE POSITIVE NEGATIVE DESCRIPTION LOCATION LOCATION LEAD LEAD HDR 2 +12 VDC Pin 1 Pin 4 or 5 Relays &...
  • Page 32 Bed Circuit Boards CPU BOARD KIT WITH HEAD WALL INTERFACE - P/N 5010-500-2 CPU BOARD KIT WITHOUT HEAD WALL INTERFACE - P/N 5010-500-3 CONNECTOR CABLE VOLTAGE POSITIVE NEGATIVE DESCRIPTION LOCATION LOCATION LEAD LEAD HDR 30 0 VAC w/o Switch Pin 2 Neutral Pin 3 Fowler Down 120 VAC w/...
  • Page 33 Bed Circuit Boards POWER SUPPLY - P/N 59-157 CONNECTOR VOLTAGE POSITIVE LEAD NEGATIVE LEAD LOCATION 110V Pin 1 Pin 2 Pin 1 Pin 4 or 5 Pin 2 Pin 4 or 5 Pin 3 Pin 4 or 5 Pin 4 Pin 4 or 5 Pin 5 Pin 4 or 5...
  • Page 34 Bed Circuit Boards OPTION POWER BOARD - P/N 5000-300-900 HDR 2 HDR 11 HDR 5 HDR 7 HDR 8 HDR 1 CONNECTOR CABLE VOLTAGE POSITIVE NEGATIVE DESCRIPTION LOCATION LOCATION LEAD LEAD HDR 1 120 VAC* Pin 1 Pin 2 AC Line Voltage from CPU Board HDR 2 +5 VDC...
  • Page 35 Bed Circuit Boards OPTIONAL SMART TV CIRCUIT BOARD WITH CUSTOM RELAYS - P/N 3001-330-960 CONNECTOR VOLTAGE POSITIVE NEGATIVE DESCRIPTION LOCATION LEAD LEAD HDR 1 5 VDC Pin 2 Pin 1 Regulated 5 VDC Power to the board HDR 1 Digital Control Pin 3-5 Pin 1 Serial control lines...

  • Page 36: Head Wall Output Configuration

    Head Wall Output Configuration 37-PIN CONNECTOR STRYKER PENDANT PORT Pin 1 Option 2 Common Pin 2 Read Light Pin 3 Room Light Pin 4 Speaker High Pin 5 Pot Wiper Pin 6 Radio Common Pin 7 Nurse Call Interlock Pin 8 Audio Transfer - Scan Line Pin 9...

  • Page 37: Cpu/Headwall Jumper Configurations

    CPU/Headwall Jumper Locations Jumper Locations Default Alternate J5 - Pot. Wiper/Speaker Pin 4 - Speaker High to Pin 5 Pot. Wiper J3 - Priority Pin 30 - Priority No Nurse Call to Pin 31 Priority Common J2 - Nurse Call Pin 25 - Nurse Call J1 - Pendant HDR 41 - Priority Parallel with...

  • Page 38: Bed Communications Tester

    3001-303-160 Optional Bed Communications Tester Item Part No. Part Name Qty. 3001-303-160 BCT Unit 3001-303-825 37-Pin Cable 3001-303-162 Instructions 3000-303-871 9V Battery...

  • Page 39: Replacement Parts List

    Replacement Parts PART NAME PART NUMBER Arm Board Assembly ............5000-101-3 Brake Adjuster .
  • Page 40 Replacement Parts PART NAME PART NUMBER Motor, Bed Lift ............. . 5010-30-71 Motor, Bed Lift, 230V .

  • Page 41: Base Assembly

    Base Assembly...
  • Page 42 Base Assembly Item Part No. Part Name Qty. 3-79 Hex Hd. Cap Screw 4-12 Soc. Hd. Cap Screw 4-24 Soc. Hd. Cap Screw 4-28 Soc. Hd. Cap Screw 4-298 Soc. Hd. Cap Screw 4-32 Soc. Hd. Cap Screw 4-86 Soc. Hd. Cap Screw 4-1 14 Soc.

  • Page 43: 715-201-150 Brake Adjuster Assembly

    715-201-150 Brake Adjuster Assembly Item Part No. Part Name Qty. 715-1-180 Cam Bearing 715-201-62 Threaded Stud Assembly 14-4 Nylon Washer 28-8 External Retaining Ring...

  • Page 44: 8" Casters Assembly

    8” Caster Assembly Assembly part number 5000-1-32 Item Part No. Part Name Qty. 11-225 Washer (page 45) 8” Steer Caster Assembly (page 44) 8” Caster Assembly...
  • Page 45 5000-2-34 8” Caster Assembly Item Part No. Part Name Qty. 3-99 Hex Hd. Cap Screw 3-227 Hex Hd. Cap Screw 11-310 Washer 16-60 Hex Nut 5000-2-29 Caster Horn w/Bearing 2025-1-47 Wheel Cover, Right 2025-1-48 Wheel Cover, Left 715-2-25 Molded Wheel Assembly...

  • Page 46: 8" Steer Caster Assembly

    5000-2-33 8”Steer Caster Assembly Item Part No. Part Name Qty. 3-99 Hex Hd. Cap Screw 3-227 Hex Hd. Cap Screw 11-310 Washer 16-60 Hex Nut 2025-1-47 Wheel Cover, Right 2025-1-48 Wheel Cover, Left 715-2-25 Molded Wheel Assembly 5000-2-32 Steer Caster Weldment...

  • Page 47: 6" Caster Option Assembly

    5000-2-50 Optional 6” Caster Assembly Item Part No. Part Name Qty. 3-205 Hex Hd. Cap Screw 3-227 Hex Hd. Cap Screw 11-310 Washer 16-60 Hex Nut (page 48) Wheel Assembly 5000-2-30 Caster Horn Assembly...

  • Page 48: 6" Steer Caster Option Assembly

    5000-2-51 Optional 6” Steer Caster Assembly Item Part No. Part Name Qty. 3-205 Hex Hd. Cap Screw 3-227 Hex Hd. Cap Screw 11-310 Washer 16-60 Hex Nut (page 48) Wheel Assembly 5000-2-31 Steer Caster Horn Ass’y...

  • Page 49: 6" Molded Wheel Assembly

    5000-2-10 Optional 6” Molded Wheel Assembly Item Part No. Part Name Qty. 81-226 Bearing 715-1-255 Wheel Bushing 5000-2-20 Molded Wheel 6060-2-46 Bearing Spacer...

  • Page 50: Litter Assembly

    Litter Assembly...
  • Page 51 Litter Assembly...
  • Page 52 Litter Assembly...
  • Page 53 Litter Assembly Item Part No. Part Name Qty. Item Part No. Part Name Qty. 3-47 Hex Hd. Cap Screw 3000-300-482 Thrust Washer 3-76 Hex Hd. Cap Screw 3000-335-1 1 Roller Bumper 8803-016-000 Hex Hd. Cap Screw 81-268 Flange Bushing 3-221 Hex Washer Hd.

  • Page 54: Assembly Drawings And Parts Lists (Continued) Fowler Motor Assembly

    Fowler Motor/CPR Assembly Assembly part numbers 5000-30-271 (Domestic) 5002-30-271 (International) (reference only) Item Part No. Part Name Qty. 3-214 Hex Hd. Cap Screw 11-63 Washer 26-53 Spring Pin 715-1-333 Release Valve Stop Sleeve 3000-300-442 Motor Mount Grommet 3000-300-455 CPR Isolation Bushing 3000-300-456 CPR Isolator 3000-300-461...
  • Page 55 Fowler Motor/CPR Subassembly Assembly part number 5000-30-369 (Domestic) Assembly part number 5002-30-369 (International) (reference only) Item Part No. Part Name Qty. 28-131 Retaining Ring 3001-300-775 Brake Kit 5000-30-340 Fowler Motor 5002-30-340 230V Fowler Motor 3000-300-604 Warning Label 3000-200-224 Thrust Washer 81-212 Thrust Needle Roller Bearing 3000-300-465...

  • Page 56: Fowler Potentiometer Assembly

    5000-30-316 Fowler Potentiometer Assembly 8.5K ohms +/-500 ohms 3 Red 4 Black Resistance is measured between Pin 3 Red & Pin 4 Black. Adjust potentiometer to 8.5K ohms +/-500 ohms. Item Part No. Part Name Qty. 4-38 Soc. Hd. Cap Screw 14-8 Nylon Washer 21-149...

  • Page 57: Front Cover Assembly

    Front Cover Assembly Assembly part number 4700-30-40 (reference only)
  • Page 58 Front Cover Assembly Item Part No. Part Name Qty. 7-58 Truss Hd. Torx 25-50 Rivet 8815-001-100 Push Mount Wire Clip 4700-30-61 Bellows, Left 4700-30-62 Bellows, Right 5010-30-21 Top Cover 5010-30-23 Top Cover Backer Plate 8800-380-000 Neoprene Sponge .33’ 11-53 Washer...

  • Page 59: Litter Capacitor Assembly

    Litter Capacitor Assembly 110V Domestic Assembly part numbers Assembly 5000-30-330 (Domestic) 5002-30-330 (International) (reference only) 230V International Assembly Item Part No. Part Name Qty. 38-151 11” Cable Tie 5000-30-5 Capacitor Mounting Panel 8806-052-500 Adhesive Foam Tape 1.67’...

  • Page 60: Non-In/Out Fowler Assembly

    Non-In/Out Fowler Assembly Assembly part number 4700-30-100 (reference only) Item Part No. Part Name Qty. 5010-30-101 Non-T ranslating Shaft 5000-80-23 Non-Fowler Slide Opt. Cable 2025-32-86 Thrust Washer 2025-32-87 Needle Thrust Bearing 26-271 Clevis Pin 14-3 Nylon Washer 27-17 Cotter Pin 27-21 Rue Ring (page 63)

  • Page 61: Skoocher Assembly

    Optional Skoocher Assembly...
  • Page 62 Optional Skoocher Assembly Item Part No. Part Name Qty. 3-221 Hex Washer Hd. Screw 3-224 Hex Washer Hd. Screw 4-304 Hex Soc. But. Hd. Cap Screw 16-3 Fiberlock Nut 26-271 Clevis Pin 26-168 Spiral Pin 27-17 Cotter Pin 28-120 External Retaining Ring 30-52 Snap Bushing 38-151...

  • Page 63: Fowler Assembly

    4700-30-50 Fowler Assembly NOTE Reference page 158 & 159 for labels. Item Part No. Part Name Qty. Item Part No. Part Name Qty. 3-64 Hex Hd. Cap Screw 3000-300-3 Bumper 7-58 Truss Hd. Torx 3001-300-99 Fowler Bushing 11-376 Washer 3000-300-1 14 4”...

  • Page 64: Square In/Out Fowler Tube Assembly

    5000-230-89 Square In/Out Fowler Tube Assembly Item Part No. Part Name Qty. 26-8 Spring Pin 5000-230-87 Square In/Out Tube 5000-230-90 Square In/Out Nut...

  • Page 65: Litter Lift/Trend Assembly

    Litter/Lift/Trend Assembly Assembly part number 4700-30-105 & 4702-30-105 (230V) (reference only)
  • Page 66 Litter/Lift/Trend Assembly VIEW A...
  • Page 67 Litter/Lift/Trend Assembly...
  • Page 68 Litter/Lift/Trend Assembly Item Part No. Part Name Qty. 3-68 Hex Hd. Cap Screw 3-82 Hex Hd. Cap Screw 3-88 Hex Hd. Cap Screw 3-93 Hex Hd. Cap Screw 3-228 Hex Hd. Cap Screw Hex Soc. Hd. Shoulder Bolt 8-45 Hex Soc. Hd. Shoulder Bolt 8-50 Hex Soc.

  • Page 69: Trend Actuator Assembly

    Trend Actuator Assembly Assembly part numbers 5000-30-278 (Domestic) 5002-30-278 (International) (reference only) Item Part No. Part Name Qty. 3-214 Hex Hd. Cap Screw 4-90 Soc. Hd. Cap Screw 11-63 Flat Washer 21-16 Set Screw 5000-230-68 Right Angle Motor Ass’y 5002-30-68 230V Right Angle Motor Ass’y 5000-30-170 Trend Motor Mount Bracket...

  • Page 70: Lift Actuator Assembly

    Lift Actuator Assembly Assembly part number 5010-230-71 (Domestic) Assembly part number 5012-30-71 (International) Thrust Bearing Installation Detail Item Part No. Part Name Qty. 26-1 1 Spring Pin 26-267 Spring Pin 59-140 Capacitor 3221-300-453 230V Capacitor 81-9 Bronze Bearing 81-276 Thrust Ball Bearing 5000-30-194 Motor Pivot Block 5000-30-255...

  • Page 71: Bed Lift/Trend Limits Assembly

    Bed Lift/Trend Limits Assembly Assembly part number 4700-30-1 10 (reference only) Item Part No. Part Name Qty. 2-34 Round Hd. Mach. Screw 3-221 Hex Washer Hd. Screw 3-224 Hex Washer Hd/ Screw 4-304 Hex Soc. But. Hd. Cap Screw 4-307 But.

  • Page 72: Bed Lift Potentiometer Assembly

    5000-30-225 Bed Lift Potentiometer Assembly 5.8K ohms +/-500 ohms 2 Green 3 Red Resistance is measured between Pin 2 Green & Pin 3 Red. Adjust potentiometer to 5.8K ohms +/-500 ohms. Item Part No. Part Name Qty. 4-38 Soc. Hd. Cap Screw 14-8 Nylon Washer 21-149...

  • Page 73: Foot Lift Assembly

    Foot Lift Assembly Assembly part numbers 4700-30-65 & 4702-30-65 (230V) (reference only)
  • Page 74 Foot Lift Assembly Item Part No. Part Name Qty. 3-214 Hex Hd. Cap Screw 11-63 Washer 26-267 Spring Pin 4700-30-25 Foot Lift Lock Plate 52-718 Nylon Insulator 3000-200-228 Motor Mounting Plate Grommet 4700-30-36 Foot Lift Shaft 5000-230-68 Right Angle Motor Ass’y 5002-30-68 230V Right Angle Motor Ass’y 5000-30-208...

  • Page 75: Foot Potentiometer Assembly

    5000-30-317 Foot Potentiometer Assembly 4.0K ohms +/-500 ohms 2 Green 3 Red Resistance is measured between Pin 2 Green & Pin 3 Red. Adjust potentiometer to 4.0K ohms +/-500 ohms. Item Part No. Part Name Qty. 4-38 Soc. Hd. Cap Screw 14-8 Nylon Washer 21-149...

  • Page 76: Seat Assembly

    Seat Assembly Assembly part number 5010-30-17 (reference only) Item Part No. Part Name Qty. 4-161 But. Hd. Cap Screw 7-58 Torx Hd. Screw 16-28 Nylock Nut 25-38 Rivet 29-3 Brass Eyelet (page 76) Hand Grip Ass’y, Right (page 77) Hand Grip Ass’y, Left 5010-30-19 Seat Weldment...

  • Page 77: Hand Grip Assembly

    Right Hand Grip Assembly Assembly part number 5010-230-60 (reference only) NOTE Reference page 158 & 159 for label. Item Part No. Part Name Qty. 3-32 Hex Hd. Cap Screw 3-57 Hex Hd. Cap Screw 3-73 Hex Hd. Cap Screw Soc. Hd. Cap Screw 11-179 Nylon Washer 11-392...
  • Page 78 Left Hand Grip Assembly Assembly part number 5010-230-61 (reference only) NOTE Reference page 158 & 159 for label. Item Part No. Part Name Qty. 3-32 Hex Hd. Cap Screw 3-57 Hex Hd. Cap Screw 3-73 Hex Hd. Cap Screw Soc. Hd. Cap Screw 11-179 Nylon Washer 11-392...

  • Page 79: Glideaway Foot Support Assembly

    Glideaway Foot Support Assembly Assembly part number 4700-40 (reference only) Item Part No. Part Name Qty. 3-229 Hex Hd. Cap Screw (page 80 & 81) Foot Mattress Assembly (page 82) Left Upright Assembly (page 83) Right Upright Assembly (page 84) Left Glideaway Assembly (page 85) Right Glideaway Assembly...
  • Page 80 Notes...
  • Page 81 4700-40-70 Slide-Off Foot Mattress Assembly Item Part No. Part Name Qty. Item Part No. Part Name Qty. 25-151 Semi-T ubular Rivet 5000-40-96 Pilot Weldment, Right 4-161 But. Hd. Cap Screw 5000-40-135 Latch Weldment, Left 4-176 But. Hd. Cap Screw 5000-40-136 Latch Weldment, Right 4-232 But.
  • Page 82 4700-40-70 Slide-Off Foot Mattress Assembly...

  • Page 83: Foot Support Upright Assembly

    Left Upright Assembly Assembly part number 5000-340-132 (reference only) Item Part No. Part Name Qty. 5010-40-71 Pull Knob 5000-40-134 Latch Pin Sleeve 5000-340-10 Left Upright Weldment 8800-201-100 Retaining Ring 8810-290-600 Compression Spring 8813-070-100 Foot Latch Pin...
  • Page 84 Right Upright Assembly Assembly part number 5000-340-133 (reference only) Item Part No. Part Name Qty. 5010-40-71 Pull Knob 5000-40-134 Latch Pin Sleeve 5000-340-1 1 Right Upright Weldment 8800-201-100 Retaining Ring 8810-290-600 Compression Spring 8813-070-100 Foot Latch Pin...

  • Page 85: Glideaway Assembly

    Left Glideaway Assembly Assembly part number 5010-340-21 (reference only) Item Part No. Part Name Qty. 4-178 But. Hd. Cap Screw 4-320 But. Hd. Cap Screw 11-343 Shim Washer 11-41 1 Washer 28-166 External Retaining Ring 37-220 Hole Plug 81-289 I-Glide Bearing 5010-40-39 Keyhole Plate (page 86)
  • Page 86 Right Glideaway Assembly Assembly part number 5010-340-22 (reference only) Item Part No. Part Name Qty. 4-178 But. Hd. Cap Screw 4-320 But. Hd. Cap Screw 11-343 Shim Washer 11-41 1 Washer 28-166 External Retaining Ring 37-220 Hole Plug 81-289 I-Glide Bearing 5010-40-39 Keyhole Plate (page 87)

  • Page 87: Foot Pan Assembly, Left

    5010-40-59 Left Foot Pan Assembly Item Part No. Part Name Qty. Item Part No. Part Name Qty. 4-42 Soc. Hd. Cap Screw 5000-90-44 “Pull” Label 4-178 But. Hd. Cap Screw 5010-40-27 Slide Weldment 23-1 Pan Hd. Thrd.-Cutting Scr. 5010-40-35 Pan Bottom 4-337 But.

  • Page 88: Foot Pan Assembly, Right

    5010-40-58 Right Foot Pan Assembly Item Part No. Part Name Qty. Item Part No. Part Name Qty. 4-42 Soc. Hd. Cap Screw 5000-90-44 “Pull” Label 4-178 But. Hd. Cap Screw 5010-40-27 Slide Weldment 23-1 Pan Hd. Thr.-Cutting Scr. 5010-40-35 Pan Bottom 4-337 But.

  • Page 89: Glideaway Link Assembly, Left

    Glideaway Link Assembly, Left...
  • Page 90 Glideaway Link Assembly, Left Item Part No. Part Name Qty. 1-124 Flat Hd. Machine Screw 3-214 Hex Hd. Cap Screw 4-28 Soc. Hd. Cap Screw 4-316 Soc. Hd. Cap Screw 26-7 Roll Pin 26-45 Roll Pin 26-172 Roll Pin 28-183 Retaining Ring 38-1 10 Compression Spring...

  • Page 91: Glideaway Link Assembly, Right

    Glideaway Link Assembly, Right...
  • Page 92 Glideaway Link Assembly, Right Item Part No. Part Name Qty. 1-124 Flat Hd. Machine Screw 3-214 Hex Hd. Cap Screw 4-28 Soc. Hd. Cap Screw 4-316 Soc. Hd. Cap Screw 26-7 Roll Pin 26-45 Roll Pin 26-172 Roll Pin 28-183 Retaining Ring 38-1 10 Compression Spring...

  • Page 93: 500Xl-Style Foot End Assembly

    4700-42 Custom 500-XL Style Foot Section Assembly Item Part No. Part Name Qty. 3-229 Hex Hd. Cap Screw (page 93) Foot Pan Assembly (page 95) Foot Rest Assembly (page 97) Foot Mattress Assembly (page 98) Left Upright Assembly (page 99) Right Upright Assembly (page 100) Foot Rest Handle Assembly...

  • Page 94: 500Xl-Style Foot Pan Assembly

    500-30-40 Custom 500XL-Style Foot Pan Assembly Item Part No. Part Name Qty. 8800-210-400 Bushing 7-10 Truss Head Screw 8800-250-700 Internal Tooth Lock Washer (page 94) Foot Pan Latch Assembly 0500-030-019 Foot Pan 8805-905-800 Foot Pan Pad 0051-023-000 Loctite 454 (not shown) Apply item G (Loctite 454) to the mating surfaces of items E &...

  • Page 95: 500Xl-Style Foot Pan Latch Assembly

    8805-906-100 Custom 500XL-Style Foot Pan Latch Item Part No. Part Name Qty. 8805-906-500 Torsion Spring 8839-783-300 Roll Pin 1060-1-151 Foot Pan Latch Base 26-7 Roll Pin 8805-906-200 Foot Pan Latch Pin...

  • Page 96: 500Xl-Style Foot Rest Assembly

    500-30-41 Custom 500-XL Style Foot Rest Assembly Item Part No. Part Name Qty. 500-30-21 Foot Rest 1060-1-1 19 Foot Rest Bushing 8805-906-000 Foot Rest Pad...

  • Page 97: 500Xl-Style Foot Mattress Assembly

    4700-42-70 Custom 500-XL Style Foot Mattress Item Part No. Part Name Qty. (page 97) Push Bar Assembly 8806-900-000 Zinc Plated Tapping Screw 4700-42-71 Foot Mattress...

  • Page 98: 500Xl-Style Push Bar Assembly

    0500-030-039 Custom 500XL-Style Push Bar Item Part No. Part Name Qty. 8800-224-400 Flat Hd. Screw 0500-030-017 Push Bar Bracket, Left 8803-073-800 Pushbar 8805-899-000 Foam Cover 0500-030-018 Push Bar Bracket, Right...

  • Page 99: 500Xl-Style Upright Assembly

    Custom 500-XL Style Upright Assembly, Left Assembly part number 5000-240-222 (reference only) Item Part No. Part Name Qty. 24-61 T-Knob 24-62 Plastic Ball 26-43 Spring Pin 5000-40-134 Latch Pin Sleeve 5000-240-190 Left Upright Weldment 8800-201-100 Retaining Ring 8810-290-600 Compression Spring 8813-070-100 Foot Latch Pin...
  • Page 100 Custom 500-XL Style Upright Assembly, Right Assembly part number 5000-240-223 (reference only) Item Part No. Part Name Qty. 24-61 T-Knob 24-62 Plastic Ball 26-43 Spring Pin 5000-40-134 Latch Pin Sleeve 5000-240-191 Right Upright Weldment 8800-201-100 Retaining Ring 8810-290-600 Compression Spring 8813-070-100 Foot Latch Pin...

  • Page 101: 500Xl-Style Foot Rest Handle Assembly

    500-30-60 Custom 500-XL Style Foot Rest Handle Item Part No. Part Name Qty. 8839-793-700 Hex Hd. Cap Screw 0500-030-020 Foot Rest Handle Bracket 8800-224-400 Phillips Flat Hd. Screw 8800-240-200 8803-074-000 Foot Rest Handle Bar 8800-630-100 Tape...

  • Page 102: Electrical Assembly

    Electrical Assembly...
  • Page 103 Electrical Assembly...
  • Page 104 Electrical Assembly Item Part No. Part Name Qty. 2-41 Round Hd. Mach. Screw 3-221 Hex Washer Hd. Screw 3-226 Hex Washer Hd. Screw 7-58 Truss Hd. Torx 13-10 External Tooth Lock Washer 13-38 External Tooth Lock Washer 16-23 Nylock Nut 16-33 Kep Nut 4700-30-26...

  • Page 105: Night Light Assembly

    5010-30-75 Night Light Assembly BOTTOM VIEW FOOT END Item Part No. Part Name Qty. 8815-002-200 Pan Hd. Screw 52-816 Grommet 59-160 Night Light 59-166 AC Socket 5010-80-18 Night Light Cable 7000-1-327 PVC Tubing .33’...

  • Page 106: No Head Wall Interface Assembly

    No Head Wall Interface Assembly Assembly part number 4700-30-94 (reference only) Item Part No. Part Name Qty. 4-307 Hex Soc. But. Hd. Cap Screw 59-137 Shunt 3001-300-970 CPU, No Head Wall, No Scale 1 5000-30-367 No Head Wall Plate 5010-300-933 Eprom Assembly...

  • Page 107: Pendant Port Assembly With No Nurse Call

    4700-30-92 Pendant Port/No Nurse Call Assembly Item Part No. Part Name Qty. 4-307 Hex Soc. But. Hd. Cap Screw 59-137 Shunt 3001-303-964 Head Wall CPU, Non-Scale 3001-314-920 Pendant Port PCB Ass’y 5010-30-1 Cover Panel 5010-80-19 Pendant Port Option Cable 5010-300-933 Eprom Assembly...

  • Page 108: Head Wall Interface Assembly With Nurse Call And No Port

    4700-30-93 Head Wall Interface - Nurse Call/No Port Item Part No. Part Name Qty. 1-87 Flat Hd. Ctr. Sk. Mach. Screw 4-307 Hex Soc. But. Hd. Cap Screw 52-783 Speed Nut 59-710 Static Plug 3001-300-7 Jack Screw 3001-303-964 Head Wall CPU, Non-Scale 5010-30-1 Cover Panel 5010-80-8...

  • Page 109: Head Wall Interface Nurse Call And Communication Assembly

    4700-30-91 Head Wall Interface - Nurse Call/Comm. HEAD END VIEW Item Part No. Part Name Qty. 1-87 Flat Hd. Ctr. Sk. Mach. Screw 4-307 Hex Soc. But. Hd. Cap Screw 52-783 Speed Nut 59-710 Static Plug 3001-300-7 Jack Screw 3001-303-964 Head Wall CPU, Non-Scale 3001-314-920 Pendant Port PCB Ass’y...
  • Page 110 Notes...

  • Page 111: Air Mattress Assembly

    Optional Air Mattress Assembly Assembly part number 4700-30-95 & 4702-30-95 (230V) (reference only)
  • Page 112 Optional Air Mattress Assembly Item Part No. Part Name Qty. Item Part No. Part Name Qty. 4-169 But. Hd. Cap Screw 5002-30-299 230V Compressor Ass’y 14-3 Nylon Washer 5000-80-21 Compressor Cable 16-3 Fiberlock Nut (page 114) Manifold Assembly 16-14 Nylock Nut 5010-90-17 Solenoid Danger Label 48-164...

  • Page 113: Power Mattress Assembly

    4700-48 Optional Power Mattress Assembly Fowler Mattress Cover Fowler Mattress Foam Item Part No. Part Name Qty. (page 113) Perineal Pillow Assembly 5010-30-59 Plastic Cap 8803-002-400 Lumbar Bag NOTE Insert the perineal pillow into the bottom of the mattress. Use the guide pins (B) on the bottom plate to locate the assembly in the holes in the bottom of the mattress cover.

  • Page 114: Perineal Pillow Assembly

    5010-30-45 Optional Perineal Pillow Assembly Item Part No. Part Name Qty. 4-189 But. Hd. Cap Screw 7-41 Truss Hd. Mach Screw 5010-30-43 Air Bladder 5010-30-44 Dist. Plate Weldment 5010-30-46 1” Limit Strap 8815-029-200 Tie Wrap H (not shown) 58-56 Edge Cover w/Adhesive 5”...

  • Page 115: Manifold Assembly

    5000-230-300 Manifold Assembly, Air Mattress Option 5002-30-300 230V Manifold Ass’y, Air Mattress Option Must be wired as shown Item Part No. Part Name Qty. Item Part No. Part Name Qty. 16-23 But. Hd. Cap Screw 5002-30-241 Regulator 48-159 Barbed Fitting 5002-30-242 Soc.

  • Page 116: Siderail Assembly

    Siderail Assembly...

  • Page 117: Siderail Latch Assembly

    Siderail Assembly...
  • Page 118 Siderail Assembly OUTER SIDERAIL PANEL INNER SIDERAIL PANEL...
  • Page 119 Siderail Assembly LEFT SIDERAIL WIRE ROUTING...
  • Page 120 Siderail Assembly RIGHT SIDERAIL WIRE ROUTING...
  • Page 121 Siderail Assembly 4700-220-1 Left Standard Components 4700-220-2 Right Standard Components Item Part No. Part Name Qty. Item Part No. Part Name Qty. 3-226 Hex Washer Hd. Screw 3-226 Hex Washer Hd. Screw 3-344 Hex Hd. Screw 3-344 Hex Hd. Screw 7-58 Truss Hd.
  • Page 122 Siderail Assembly Inner Option Label All labels shown are right side. 4700-20-101 Standard Siderail Item Part No. Part Name Qty. (page 134) Outer Panel Ass’y, No Nurse Call 5000-90-20 Label, Inner, Right, No Options 5000-90-30 Label, Inner, Left, No Options 3001-400-953 Switch Cap Outer Option Label...
  • Page 123 Siderail Assembly All labels shown are right side. Inner Option Label 4700-20-112 Standard Siderail with Nurse Call & Lumbar Item Part No. Part Name Qty. (page 135) Outer Panel Ass’y w/Nurse Call 23-1 12 Tapping Screw Lumbar Option 3000-300-1 14 Cable Tie Label 5000-90-21...
  • Page 124 Siderail Assembly All labels shown are right side. Inner Option Label 4700-20-117 Standard Siderail with Skoocher Item Part No. Part Name Qty. (page 134) Outer Panel Ass’y, No Nurse Call 5000-90-20 Label, Inner, Right, No Options 5000-90-30 Label, Inner, Left, No Options 3001-400-953 Switch Cap 3001-400-522...
  • Page 125 Siderail Assembly All labels shown are right side. Inner Option Label 4700-20-124 Siderail with Skoocher, NC & Lumbar Item Part No. Part Name Qty. (page 135) Outer Panel Ass’y w/Nurse Call 23-1 12 Tapping Screw Lumbar Option 3000-300-1 14 Cable Tie Label 5000-90-21 Label, Inner, Right, w/Nurse Call...
  • Page 126 Siderail Assembly Inner Option Label All labels shown are right side. 4700-20-134 Siderail with Nurse Call, Smart TV & Lights Item Part No. Part Name Qty. (page 135) Outer Panel Ass’y, w/Nurse Call Smart TV 5000-90-93 Label, Inner, Right, N/C, TV, Lights Option Label 5000-90-103 Label, Inner, Left, N/C, TV, Lights...
  • Page 127 Siderail Assembly All labels shown are right side. Inner Option Label 4700-20-135 Siderail w/Skoocher, NC, Smart TV, Lights and Lumbar Item Part No. Part Name Qty. (page 135) Outer Panel Ass’y, w/Nurse Call 23-1 12 Tapping Screw Lumbar/Smart TV 3000-300-1 14 Cable Tie Option Label 5000-90-93...
  • Page 128 3002-400-70 Siderail Latch Assembly, Head End, Left Item Part No. Part Name Qty. 26-86 Blind Rivet 81-317 Bronze Bushing 3002-400-501 Latch 3002-400-503 Head End Bypass Plate 3002-400-509 Bypass Bushing Spacer...
  • Page 129 3002-400-75 Siderail Latch Assembly, Head End, Right Item Part No. Part Name Qty. 26-86 Blind Rivet 81-317 Bronze Bushing 3002-400-501 Latch 3002-400-503 Head End Bypass Plate 3002-400-509 Bypass Bushing Spacer...

  • Page 130: Siderail Bypass Detent Clip Assembly

    3002-400-90 Siderail Bypass Detent Clip Assembly Item Part No. Part Name Qty. 31-137 Steel Ball 38-464 Compression Spring 3002-400-524 Bypass Detent Housing...

  • Page 131: Siderail Timing Link Assembly

    4700-320-4 Right Hd. End Siderail Timing Link Ass’y Item Part No. Part Name Qty. 11-377 Nylon Washer 11-403 Shim Washer 3001-401-228 Arm Weldment, Rt., Hd., Hd. 3001-400-501 Siderail Linkage Rivet 3002-401-227 Arm Weldment, Rt., Hd., Ft. 3001-400-1 1 Head End Timing Link...
  • Page 132 4700-320-5 Left Head End Siderail Timing Link Ass’y Item Part No. Part Name Qty. 11-377 Nylon Washer 11-403 Shim Washer 3001-401-128 Arm Weldment, Lt., Hd., Hd. 3001-400-501 Siderail Linkage Rivet 3002-401-127 Arm Weldment, Lt., Hd., Ft. 3001-400-1 1 Head End Timing Link...

  • Page 133: Siderail Release Lever Assembly

    4700-220-6 Right Release Lever Assembly Item Part No. Part Name Qty. 4-278 But. Hd. Cap Screw 16-2 Nylock Nut 3001-400-514 Release Lever Pad 3002-400-510 Release Lever...
  • Page 134 4700-220-7 Left Release Lever Assembly Item Part No. Part Name Qty. 4-278 But. Hd. Cap Screw 16-2 Nylock Nut 3001-400-514 Release Lever Pad 3002-400-510 Release Lever...

  • Page 135: Siderail Outer Panel Assembly

    4700-20-11 Outer Siderail Panel w/o Nurse Call Option Item Part No. Part Name Qty. 3001-400-599 Handle Insert 4700-20-10 Outer Panel, w/o N.C. 23-1 12 Tapping Screw...
  • Page 136 4700-20-9 Outer Siderail Panel w/Nurse Call Option Item Part No. Part Name Qty. 3001-400-599 Handle Insert 4700-20-8 Outer Panel w/N.C. 23-1 12 Tapping Screw...

  • Page 137: Siderail Lumbar Module Assembly

    5000-220-8 Optional Siderail Lumbar Module, Left Item Part No. Part Name Qty. 3001-400-524 Lumbar Module 3001-400-953 Switch Cap 5000-400-930 Lumbar Keypad PCB, Left 23-1 12 Tapping Screw 3001-400-522 Filler Cap...
  • Page 138 5000-220-10 Optional Siderail Lumbar Module, Right Item Part No. Part Name Qty. 3001-400-524 Lumbar Module 3001-400-953 Switch Cap 5000-400-920 Lumbar Keypad PCB, Right 23-1 12 Tapping Screw 3001-400-522 Filler Cap...

  • Page 139: Siderail Smart Tv Module, No Lumbar

    5000-20-28 Optional TV Module, No Lumbar, Left Item Part No. Part Name Qty. 3001-400-524 Lumbar Module 3001-400-953 Switch Cap 5000-400-930 Lumbar Keypad PCB, Lt. 23-1 12 Tapping Screw 3001-400-522 Filler Cap...
  • Page 140 5000-20-29 Optional TV Module, No Lumbar, Right Item Part No. Part Name Qty. 3001-400-524 Lumbar Module 3001-400-953 Switch Cap 5000-400-920 Lumbar Keypad PCB, Rt. 23-1 12 Tapping Screw 3001-400-522 Filler Cap...

  • Page 141: Siderail Smart Tv Module, With Lumbar

    5000-20-26 Optional TV Module with Lumbar, Left Item Part No. Part Name Qty. 3001-400-524 Lumbar Module 3001-400-953 Switch Cap 5000-400-930 Lumbar Keypad PCB, Left 23-1 12 Tapping Screw...
  • Page 142 5000-20-27 Optional TV Module with Lumbar, Right Item Part No. Part Name Qty. 3001-400-524 Lumbar Module 3001-400-953 Switch Cap 5000-400-920 Lumbar Keypad PCB, Right 23-1 12 Tapping Screw...

  • Page 143: Pendant Assembly

    Optional Pendant Assembly 5000-81-20 5000-81-21 5000-81-23 Communication Pendant Motion Pendant Motion Pendant with Nurse Call...

  • Page 144: Wood Head Board Assembly

    Wood Head Board Mounting Hardware Assembly part number 4700-31-20 (reference only) Item Part No. Part Name Qty. 23-92 Truss Hd. Screw 37-62 Hole Plug 58-65 Handle Crank Clip 4700-30-51 Frame Weldment, Left 4700-30-56 Frame Weldment, Right 4700-30-57 Push Handle End Cap 5000-30-270 Plastic Insert (page 144)

  • Page 145: Crank Handle Assembly

    5000-230-320 Motor Crank Handle Assembly Item Part No. Part Name Qty. 26-267 Spring Pin 5000-230-321 Crank Handle 5000-30-322 Crank End 5000-30-323 Crank Handle Collar...

  • Page 146: 3-Stage I.v. Mounting Pole Mounting Assembly

    4700-101 Optional 3-Stage I.V. Pole Mounting Ass’y HEAD END Item Part No. Part Name Qty. 3-226 Hex Washer Hd. Screw 4-199 But. Hd. Cap Screw 4-278 But. Hd. Cap Screw 16-36 Nylock Nut 1001-59-12 I.V. Clip (page 146) 3-Stage I.V. Pole Assembly 4700-30-23 I.V.

  • Page 147: 3-Stage I.v. Pole Assembly

    1211-211-10 Optional 3-Stage I.V. Pole Assembly Item Part No. Part Name Qty. Truss Hd. Machine Screw 26-76 Roll Pin 52-17 Spacer 1211-210-31 2nd Stage Assembly 926-400-162 Spacer (page 147) 3rd Stage Assembly 1001-161-23 Base Tube 1010-259-16 I.V. Hook 1010-61-14 Collar (page 148) I.V.

  • Page 148: 3Rd Stage Assembly

    1211-210-32 Optional 3rd Stage Assembly NOTE Item F, part number 1010-61-18 is left hand thread. When removing it, turn clockwise to loosen it. Item Part No. Part Name Qty. 31-21 Ball 38-303 Compression Spring 1010-61-13 Ball Retainer 1010-61-16 Retaining Shaft 1010-61-17 Thumb Knob 1010-61-18...

  • Page 149: Pole Latch Assembly

    1211-210-26 Latch Assembly, Optional 3-Stage I.V. Pole Item Part No. Part Name Qty. 28-167 Retaining Ring 31-4 Steel Ball 38-392 Crest-to-Crest Spring 1211-91-34 Release Label 1211-1 10-18 I.V. Latch Seal 1211-1 10-20 Washer 1211-1 10-21 I.V. Latch Locking Pin 1211-1 10-22 I.V.
  • Page 150 4700-40-20 (2) Attachable/Storable Calf Rests 4700-40-35 (2) Free Standing Calf Rests...

  • Page 151: Calf Rests

    4700-40-21 Attachable/Storable Calf Rest Ass’y, Left Item Part No. Part Name Qty. Item Part No. Part Name Qty. 8-51 H. Soc. Hd. Sh. Bolt 1-97 H. Soc. Flat Hd. Screw 1060-1-155 Ball Post 13-24 Int. Tooth Lock Washer 1060-1-157 Leg Support Mtg. Plate 5010-40-71 Stainless Steel Pull Knob 5000-40-134...

  • Page 152: Attachable/Storable Calf Rest Assembly, Right

    4700-40-22 Attachable/Storable Calf Rest Ass’y, Right Item Part No. Part Name Qty. Item Part No. Part Name Qty. 8-51 H. Soc. Hd. Sh. Bolt 1-97 H. Soc. Flat Hd. Screw 1060-1-155 Ball Post 13-24 Int. Tooth Lock Washer 1060-1-157 Leg Support Mtg. Plate 5010-40-71 Stainless Steel Pull Knob 5000-40-134...

  • Page 153: Free Standing Calf Rest Assembly

    4700-40-30 Free Standing Calf Rest Assembly Item Part No. Part Name Qty. 1060-1-155 Ball Post 4700-41-10 Calf Rest Cover Ass’y 5000-240-171 Calf Support Weldment 8800-200-800 Spiral Retaining Ring 1-97 Flat Soc. Hd. Screw 13-24 Internal Tooth Lock Washer 8805-906-900 Leg Rest 8805-91 1-700 Warning Label 8806-124-800...

  • Page 154: Labor Bar Assembly

    5000-101-27 Optional Labor Bar Assembly Item Part No. Part Name Qty. 5000-101-2 Labor Bar 5000-101-31 8809-520-500 Labor Bar Label...

  • Page 155: Plastic Basin Assembly

    5000-30-297 Standard Plastic Basin Assembly Item Part No. Part Name Qty. 4-232 Button Hd. Cap Screw 5000-30-230 Basin 8812-290-000 Basin Button...

  • Page 156: Stainless Steel Basin Assembly

    5010-201-29 Optional Stainless Steel Basin Assembly Assembly part number 5000-101-28 (reference only) Item Part No. Part Name Qty. 4-232 Button Hd. Cap Screw 7-52 Truss Hd. Torx 5000-201-29 Stainless Steel Basin 5000-101-30 Pan Spacer 8812-290-000 Basin Button...

  • Page 157: Arm Board Assembly

    4700-43 Optional Arm Board Assembly Item Part No. Part Name Qty. 8800-440-200 1” Hook Tape 12” 8805-897-900 Arm Board Pad 4700-43-1 Arm Board Mattress 5000-101-4 Arm Board...

  • Page 158: Multi-Purpose Shelf Assembly

    5000-101-44 Optional Multi-Purpose Shelf Assembly Item Part No. Part Name Qty. 8805-946-000 Weight Capacity Label 8805-997-400 Shelf Label 5000-101-001 Shelf 4-46 But. Hd. Cap Screw 16-28 Nylock Nut 5000-40-179 Shelf Mount...

  • Page 159: Label Assembly

    Label Assembly...
  • Page 160 Label Assembly Item Part No. Part Name Qty. 36-1 15 Ground Label 988-2-708 Electric Shock Caution Label 1550-90-1 Grounding Caution Label 1550-90-20 O2 Caution Label 2011-1-104 Anesthetics Danger Label 2020-88-820 Fire Hazard Label 4700-90-2 CPR Release Label 3001-310-601 Night Light Label 4700-90-7 Specification Label 4700-90-1 1...

  • Page 161: Limited Warranty

    No employee or representative of Stryker is authorized to change this warranty in any way. Stryker Medical beds are designed for a 15 year expected life under normal use conditions and appropriate periodic maintenance as described in the maintenance manual for each device.

  • Page 162: Return Authorization

    Claims for any short shipment must be made within thirty (30) days of invoice. International Warranty Clause: This warranty reflects U.S. domestic policy. Warranty outside the U.S. may vary by country. Please contact your local Stryker Medical representative for additional information.
  • Page 163 European Representative Stryker France Phone: 33148632290 BP 50040-95946 Roissy Ch. de Gaulle Fax: 33148632175 Cedex-France 6300 Sprinkle Road, Kalamazoo, MI 49001-9799 (800) 327-0770 www.strykermedical.com JH 9/05 4700-009-002 REV C...

This manual is also suitable for:

Adel 5012

Table of Contents