Table of Contents
Advertisement
Setting in the local station
Connect GX Works3 to the CPU module on the local station and set parameters. Set the station No.1 and 2 to the same
setting.
Master station (station No.0)
1.
Set the CPU module in the following item.
[Project] [New]
2.
Click the [Setting change].
Click the [Setting change] button.
3.
Add the module labels of the CPU module.
"Module Label" "Operation Setting" "Use Module Label" [Yes] Click the [OK] button.
7 OPERATION EXAMPLES
70
7.2 Communication Examples
Setting
Local station (station No.1)
Setting
Local station (station No.2)
Advertisement
Table of Contents
