Table of Contents
Advertisement
Checking the network status
Once parameters are set for the master station and local station, the CC-Link IE Field Network diagnostics of EM Configurator
can be used to check whether data link is normally operating.
1.
Connect EM Configurator to the Simple Motion board on the master station.
2.
Start the CC-Link IE Field Network diagnostics.
[Diagnostics] [CC-Link IE Field Diagnostics]
If the following display appears, data link is normal.
When an icon indicating an error is displayed in "Network Status" in "CC-Link IE Field Diagnostics", use the CC-Link IE Field
Network diagnostics to identify the cause of the error and take corrective actions. (Simple Motion Board User's Manual
(Network))
7 OPERATION EXAMPLES
7.2 Communication Examples
7
73
Advertisement
Table of Contents
