Table of Contents
Advertisement
Copier care
78
Cleaning the document glass and cover
Keeping the document glass and document cover clean helps
ensure the best possible copies. XEROX suggests that you clean
the document glass at the start of each day and during the day
as needed.
Caution: Do not pour or spray water directly onto any part of
the copier.
Note: For copiers equipped with the ADF/DADF refer to the
ADF/DADF belt cleaning section to clean the belt.
Procedure:
1. Slightly dampen a soft lint-free cloth or paper towel with
water.
2. Open the document cover or ADF/DADF.
3. Wipe the surface of the document glass until it is clean
and dry.
4. Wipe the underside of the document cover until it is
clean and dry (skip this step if there is an ADF/DADF on
the copier).
5. Close the document cover or ADF/DADF.
XDL23/XDL33/XDL33D User Guide
Advertisement
Table of Contents
