Book
TOC
Chapter
TOC
Search
To run the Clean Head Procedure:
Press the
Menu
1
on the one-touch keypad. The display indicates SELF TEST ?.
Press the
button. CLEAN HEAD ? appears in the LCD
Up
2
display.
Press the Start/Enter
3
LCD display.
The WorkCentre 470cx prints a head cleaning test pattern. Notice
the series of diagonal lines across the top and bottom of the test
pattern. Breaks within a line of the same color indicate a clogged
nozzle. Try running the Clean Head procedure again if you see
breaks in the diagonal lines.
Previous Page
, then press the Maintenance button
button
button. PRINTING... appears on the
8-10
Next Page