Table of Contents
Advertisement
Book
TOC
Chapter
TOC
Search
Tone
If your telephone service is configured for pulse dialing, you may
still need to use Touch Tone signals to perform special operations
by phone. Bank-by-phone and voice mail are two examples of
systems that require Touch Tone signals. You can send Touch
Tone signals by following these steps:
Dial the number using pulse dialing.
1
When the remote phone answers, press the * button.
2
Any numbers you now press will be sent as Touch tones for the
remainder of the call.
Enter the remaining numbers required by the service. The
3
machine returns to the pulse mode after you complete the call.
Flash
Some special phone services require a switch-hook signal for
proper operation. For example, if you have call waiting, you can
put a call on hold and take a second call on the same line by
pressing the switch-hook button. Pressing the Flash button
performs the equivalent of a switch-hook operation.
When you are on the telephone and hear the call waiting signal,
1
press the Flash button once. The first caller is placed on hold;
you are connected to the second caller.
Previous Page
3-37
Next Page
Advertisement
Table of Contents
