Table of Contents
Advertisement
Book
TOC
Chapter
TOC
Search
If the remote machine is secured with a poll code, you must
8
enter the correct code, and press the Start/Enter
Or
If the remote machine is not secured with a poll code, press the
Start/Enter
button to accept [0000] which represents no
code.
The display prompts for the time range, during which the
9
machine will call and poll the remote machine(s).
START -> END
HH:MM -> HH:MM
Type the time range for polling. If you have configured your
machine to use a 12-hour format, remember to specify A.M. or
P.M.
Press the Start/Enter
10
Note:
If you set a time earlier than the current time, your machine
calls the number at that time on the following day.
The display prompts for the Interval Time of the continuous
11
polling. For example, to set your machine to poll the remote
machine at 30-minute intervals, enter 0030.
Previous Page
button.
4-12
button.
Next Page
Advertisement
Table of Contents
