Table of Contents
Advertisement
INFO
y Before making connections, please make sure the PV array open circuit voltage
is within 600 V; otherwise, the product could be damaged.
y Never use any solvents, abrasives, or corrosive materials to clean this product.
y Do not place the product on or against any objects. It may cause serious
defects or malfunctions.
y Before making a connection, make sure the PV switch on this product is
switched off.
y This unit is designed to feed power to the public grid only. Do not connect this
unit to an AC source or generator. Connecting the product to external devices
could result in serious damage to that equipment.
y Servicing batteries should be performed or supervised by an LG service person
or trained installer.
y The battery does not discharge when the load is under a certain level.
y This product can cause current with a DC component. Where a residual
current-operated protective device (RCD) or residual current monitoring (RCM)
device is used for protection in case of direct or indirect contact, only a RCD or
RCM of type A (or type B) is allowed on the supply side of this product.
y This document is for your reference only. Read the installation manual on the
website below.
y Please check the following website for the warranty policy.
http://www.lg.com/global/business/ess/business-resources/download
y For stable operation and periodic system updates of the product, LG Electronics
strongly recommends that the user register with EnerVu and stay connected.
y LG ESS is under continuous development and its firmware is updated at regular
intervals. To ensure that the product works properly, LG ESS must be updated
with the latest firmware.
y Malfunctions that can be traced back to the use of outdated firmware
are not covered by the LG Electronics' product warranty. The automatic
firmware update takes place when LG ESS is registered with EnerVu (strongly
recommended) and connected to the Internet. Further information can be
found in Chapter "EnerVu Settings" of the LG ESS installation manual.
Indicates a risk of possible damage to the product.
Getting Started
7
1
Advertisement
Table of Contents
