Table of Contents
Advertisement
Energy Device
Select [ ] > [Energy Device] to display the Energy Device screen.
[EV]
Tap this switch to select [On] or [Off].
If the 'EV Charger' is not installed, a notice will pop up.
Set the option to [On] to enable EV monitoring.
[EV Charger Settings]
You can set the EV Charge Configuration and monitor the
EV Charger Status.
Please refer to the Installation Guide for detailed
information.
[AWHP]
Tap this switch to select [On] or [Off].
The status description of the energy device is as follows.
Not Connected: AWHP setting is enabled and is not
connected.
Connected: AWHP setting is enabled and is connected.
[Air-to-Water Heat Pump]
You can set the AWHP Configuration.
Please refer to the Installation Guide for detailed
information.
Settings
123
3
Advertisement
Table of Contents
